: left;padding-bottom: 0.0px;widows: 2;text-transform: none;background-color: #ffffff;text-indent: 0.0px;margin: 0.0px;padding-left: 0.0px;padding-right: 0.0px;font: 12.0px / 1.5 tahoma , arial , 宋体 , sans-serif;white-space: normal;orphans: 2;letter-spacing: normal;color: #333333;clear: both;word-spacing: 0.0px;padding-top: 0.0px;-webkit-text-stroke-width: 0.0px;-webkit-text-size-adjust: auto;">









I. pasting method of small car stickers with transparent transfer film (dry pasting method) : 

  Tools: a rag, a scratcher, or a credit card   

  1. Clean the body and keep it dry.

   2. Determine the position to be pasted. Under normal circumstances, slowly paste one side, with a tool to scrape flat, while revealing the bottom of the paper.   3. If the graph is not big enough, the transparent transfer film and stickers can be torn off and pasted again. However, care must be taken not to cause accidental adhesions.

   4, after the good paste, again repeatedly scraping and pressing several times. Remove the transparent transfer film.

   5, in the door and sewing with a knife knife, to the inside of the package.

   6, do not let the car stickers and the body have any separation or protuberance.
2. Pasting method of large car stickers with transparent transfer film (wet pasting method) :

   Tools: dusters, sprinklers, scratchers, or credit CARDS

   1. Clean the body and evenly sprinkle water on the body parts to be pasted. & ndash; In order to reduce the viscosity of stickers, easy to adjust the position.   2. Determine the position to be pasted. Slowly paste on the side, while gently scraping with tools, while revealing the bottom of the paper.

   3, in case of door handles or chafing strips, cut and wrap the material according to the situation.

   4, appropriate adjustment, the general position of the figure to determine the correct, repeatedly scraping away the water and bubbles. Remove the transparent transfer film.   5, in the door and sewing with a knife knife, to the inside of the package.

   6, do not let the car stickers and the body have any separation or protuberance.

   7, as far as possible to let the car stickers dry out the moisture, conditions can be moderately heated drying. Don't wash your car for a day or two, depending on the weather.