[product name] motorcycle general multi-function refit instrument tachometer/odometer/oil meter/speedometer combination of 7 color LCD   Table - 043.

[product material] aluminum alloy material

[applicable model] a model with all mechanical rotating speeds

[product color] electroplated shell/electroplated shell

[product size] 5.5*6.5*7.5cm

[product weight] 276G

[product packaging] corrugated cardboard box

[connection mode] Black - positive   
                     Green minus negative
                     Black-red speed signal line
                     Blue and white - oil level signal

                     Press the black button on the back for 3 seconds to change the light

 [connection mode][1] backlight, 7 colors in total, can be switched freely: long press the button when the odometer is ODO Switch backlight colors for 3 seconds

                     [2] switching between KM/H and MPH: hold down the button and turn on the switch again, and the screen will display P0000, where the ones place 0 flashes,The long press jumps to the tens place 0 flashes, and the short Ann tens place appears as   1, and then long press to jump to the hundreds flashing, short press 6 under the hundreds display 6.
Then long press the thousand digit to flash, short press the thousand digit 6 times to display 6, then the screen displays 00466, this       Denotes that 46.6hz corresponds to 60KM/H.Short press to skip (this is not set), then the screen       The screen shows 1001,1001 represents KM/H, if we want to switch to MPHLong in the ones place             Shuo, long press switch to 1002, that means we've set it to MPH at this point. Short press to skip to the next term
                   [3] set the number of rotating speed cylinders... Press the screen to display 2002, indicating that it is 2 cylinders (166HZ corresponds to 10*1000RPM/MIN).The short press skips the long press and flashes, then presses again bits 2 is switched to 4, indicating that it has been switched to 4 cylinders (333HZ corresponding) 10 * 1000 RPM/MIN).

                 [4] fuel gauge setting... . Then, press the button to display 3002, indicating that it is 2-line oil gauge. Press the button to set all the Settings and save to exit.Long press single digit to flash, long press to display3003, indicating that it has been switched to 3-line oil gauge, short press save to exit