Wire cutter size selection: the commonly used wire cutter is mainly 6 ", 7", 8 ", 1 inch is equal to 25mm, calculated according to the average height of about 1.7 m in Chinese, 7 inches (175mm) it is suitable to use. The 8-inch strength is relatively large, but it is slightly heavy. The 6-inch one is relatively small, and it is difficult to cut a slightly thicker steel wire. The 5-inch one is the mini wire cutter.

Wire cutter precautions for use: use pliers we should do what we can and cannot use it overloaded. Do not twist the pliers under the condition of continuous cutting, which is easy to collapse teeth and damage. No matter steel wire, iron wire or copper wire, as long as the pliers can leave bite marks, then use the teeth of the front mouth of the pliers to clamp the steel wire, gently lift or press the steel wire, you can break the steel wire, not only labor-saving, but also no damage to the pliers, can effectively prolong the service life. In addition, if the steel wire pliers are insulated and non-insulated, pay attention to distinguish them when operating with electricity, so as not to be hurt by strong electricity!