By default, customers who place orders must see:

one does not pick colors or styles. Orders paid after 4 pm every day need to be shipped the next day.

Non-domestic general-purpose models such as 110V or British plug are available by default. The color is not specified or the style is not specified. For customers who need to customize Amazon AliExpress LAZADA, please contact customer service. The remarks for placing orders directly for non-general-purpose models are invalid.

Customers who have made more than 5 transactions with our store support the wholesale price of one piece dropshipping.

US Standard version ice crusher, generally not in stock, need to be customized, the cycle is half a month, a small amount can be registered, when there is a order, do it together with the minimum order quantity

general operating procedures:
1. Ice crusher should be installed on the workbench with sufficient supporting force and have appropriate distance from the ground.

2. Before switching on the power supply, check whether the power supply voltage used is consistent with the voltage used by the machine, whether the socket meets the safety standards, and earth leakage circuit breaker and ground wire have been installed. Confirm that everything meets the requirements of electricity consumption.

3. Before starting the machine, break the ice cube to a diameter of about 20mm before putting it into the barrel. It is appropriate that the upper edge is convex through the mouth of the barrel. Pay attention to turn on the power switch first. After the motor is rotated with the Power Plate, the tape guide handle is pressed down. At this time, the Ice Cube is chopped by tightening the blade on the rotating knife plate. However, when operating tape guide the handle is pressed down, do not push too hard to prevent the motor from blocking and damaging the motor. And should pay attention to the balance after the reduction of the ice material, and replenish the new ice material block in time.

4. The chopped ice cube flows into the tray through the outlet. Pay attention to the smooth discharge at the discharge port and cannot be blocked, otherwise the cutter plate will be stuck and the motor will be burnt out. If the cutter disk is stuck, lift the tape guide handle immediately, turn off the switch, pull off the plug, and eliminate the fault in time.

5. The thickness of ice cube can be realized by adjusting the height of the blade mouth protruding from the cutter plate. When adjusting, remove the plastic tray of the protective switch device first, loosen the screw fixing the elbow, and pull out the barrel, then loosen the fastening screw of the cutter, remove the cutter, loosen the pressing screw of the blade, install it in place according to your requirements, and then install the cutter and so on back to the original ice crusher & food machinery in order

ice crusher made of stainless steel, which meets the requirements of food hygiene. The body design is novel, the performance is superior, and the appearance is luxurious and elegant. It is suitable for hotels, bars, cold drink shops, casual coffee restaurants and other uses to make cool and delicious iced drinks.

Technical parameters:
voltage: 220V
frequency: 50Hz
power: 380W
speed: 65kg/hr
net Weight: 5.2kg
body size: 400 × 180 × 310mm
outer packing size: 425 × 205 × 320mm
shaved ice food production methods:
place ice cubes in the shaved ice machine and cut them into snowflake-shaped plates, add 1-2 spoons of red honey bean (mung beans, preserved fruit, nuts can be used) on the shaved ice, and then add 2 spoon jam.
① production method of Black Pearl snow ice:
place ice cubes in the shaved ice machine and cut them into snowflakes in a small bowl. Put the boiled black tapioca pearls on the spoon, add 2 shaved ice jam, and then add 1 spoon raisin, appropriate amount of condensed milk milk, pour 1 spoon syrup.
② production method of strawberry snow ice:
place ice cubes in the shaved ice machine and cut them into snowflakes in a small bowl, add 2 spoon strawberry jam to shaved ice, and then add a proper amount of condensed milk. (Flavors such as pear snow ice and dark plum snow ice can be adjusted by changing jam. The production method is the same)
③ making method of red bean milk ice: Place ice cubes in ice crusher and cut them into snowflake-shaped bowls, add 2 Spoon braised and cooked red beans on ice, add a proper amount of condensed milk milk and pour 2 spoon fructose. (Mung bean milk ice is made in the same way)
④ production method of eight treasures snow ice:
place ice cubes in the shaved ice machine, cut them into snowflakes and put them in a small bowl, add a proper amount of eight treasures porridge to shaved ice, and then add a proper amount of condensed milk to pour 1 spoon fructose.
⑤ jequity bean ice making method:
place ice cubes in the shaved ice machine, cut them into snowflakes and put them in a small bowl, add 2 spoon red beans to shaved ice, and then add 2 spoon red beans, add a proper amount of condensed milk and pour 1 spoon fructose.
⑥ egg pudding ice making method:
place the ice cube in the shaved ice machine, cut it into a snowflake shape and put it in a small bowl. Cut the pudding into pieces and add 1 shaved ice of raisins to the spoon, and then add a proper amount of condensed milk, pour 1 spoon sugar water.
⑦ Pearl fresh fruit ice: Wash all kinds of fruits separately, peel them, cut small pieces and put them into the plate, cover them with Crystal, pour pearls with 2 spoon, and add fructose water to make them. Mix them well when eating, which is nutritious and delicious.

Other products on sale