There are two sticking methods for this kind of products, each of which has its advantages and disadvantages. Dry stickers are difficult to stick at first, but the positioning is good, once successful, wet stickers can be moved, but bubble extrusion requires certain technology and patience, so each has its advantages and disadvantages, keep the temperature of the film before sticking. It is recommended to warm the air outlet for half a minute. The temperature is high, the plasticity is much better, and it is easy to bend.

At present, many car door interior of cars are light colors. When entering and leaving cars, it is inevitable that shoes will rub or encounter other hard objects, which are easy to rub dirty or even scratch. Leave ugly dirt or scratches. In the past, many car owners were worried that these plastic places could not be cleaned. Due to the accumulation over the years, how to clean them looks dark, which is not commensurate with other positions in the car.

This product is made of technical texture polyurethane film (commonly known as rhino leather), with rhino leather-like strength and toughness. It can protect plastic plates in various parts of the car, and has material ductility, transparency and curved surface adaptability. Self-adhesive on the back, attached to the car door panel interior. After installation, it gets dirty and can be cleaned as new as long as you gently wipe it. Product installation:
first, clean all the dirt to be pasted with alcohol or foamed cleaner. If there is wax on the surface, wash it with boiled water and hot water above 60 degrees (important).
Second, compare the film with the shape of car door interior and cut off the extra parts,
third, tear the mucosa and stick it on it. If there is any uneven place, pull it aside by hand, then heat it with a hot air gun (or hair dryer) and press it gently.
Fourth, please go to the car decoration site for construction.