Specifications: Green 6mm, yellow 12mm, red 18mm, blue 25mm

weight: 91G set

packing size: 155 * 80mm

material: cold plate punch stretch molding and electroplating

iron plus plastic

the packaging plastic seal may be damaged due to transportation, and the goods are intact, so you can rest assured to buy it.

It is not a quality problem caused by occasional scratches caused by plastic characteristics. If you take the photo, you will be recognized.

Instructions for Use

example: 12mm Binder, prepare 24mm width oblique cloth strip (45 degree angle is the most appropriate), which needs to be longer than the expected production length.

When using, cut the front end of the cloth strip into a triangle for insertion. Enter from the binder big end and exit from the small end.

After pulling out the cloth strips, arrange them slightly and iron them with an iron.

Other models ibid

small knowledge

6mm is the width of finished edge banding. Prepare a 12mm width diagonal cloth strip, and the edging of the work is 3mm (the edging strip is folded in half)

12mm is the width of finished edge banding. Prepare a 24mm width diagonal cloth strip, and the edging of the work is 6mm (the edging strip is folded in half)

18mm is the width of finished edge banding. Prepare a 36mm width diagonal cloth strip, and the edging of the work is 9mm (the edging strip is folded in half)

25mm is the width of finished edge banding. Prepare slant cloth strips with a width of 46mm, and the edging of the work is 11.5mm (the edging strips are folded in half)

friendly Tips for your reference

6mm (narrow edge type): the commonly used model of glass painting patchwork with thin belt decorative edge;

12mm (narrow edge type): common models of thin belt and decorative edge;

18mm (conventional type): regular width of edge banding;

25mm (wide edge type): thick works/conventional width for wide edge wrapping;