Use, maintenance and precautions of Juicer

 1. Charging: it takes more than 3 hours to charge for the first time, and 8 hours is better. Otherwise, it is easy to run out of power or not turn.

2. After charging, please unplug the charging cable. The juicer does not work in the charging state.

3. Tighten: when the cup body and base cannot be turned on, please tighten the cup body and base again. At this time, the blue light flashes five times, and the activation program can be turned on and used. (This one is for juicer with protection device)
4. Fruit: the fruit should be cut into small pieces of 1.5cm
5. Add water: After putting the fruit, you must add 1/2 water or milk of the fruit volume. Do not dry squeeze, which is easy to burn out the motor. (Unless it is a fruit with a lot of water, such as watermelon, there is no need to add water).
VI. Switch: Be sure to tighten the lid of the juicing Cup and turn it upside down to expose the blade in the air. Start switch (otherwise, the blade will easily get stuck by fruit and embedded machine will not rotate), after the handstand is started, it should be shaken left and right at 45 degrees, and the juicing effect will be better.

VII. Leakage: Please check whether the silicone ring is not properly assembled. Please reinstall the seal ring.

8. When cleaning, you can remove the cup body and lid for cleaning. The base cannot be put into water for cleaning, so as not to cause water to damage the components in the base.

9. The juicer is prohibited from idling to avoid heating and damaging the motor and seal.

• specifications:8 * 23.5cm

• packaging: Color box

• capacity:380ml

• color box specifications:8.5 * 24.2cm

• product Weight: with color box510g

• packing quantity:30 A

• box gauge:53.5*45 * 26cm

• packing weight:16 kg 

• material: ABS+PS+PP

• charging cable length: 50cm

• dynamic force:3.7V

speed:15000/18000