Precautions
1. Contain pressurized flammable gas, please stay away from children;
2. Do not puncture or throw a lighter, and do not throw it into the fire;
3. Please use it in a ventilated environment and pay attention to flammable items;
4. Fire head is strictly prohibited to face, skin, clothing and other combustible substances to avoid danger;
5. Please check the position of burner when igniting, and press the ignition appropriately. Lighters of different styles are ignited in different ways: they are divided into direct beating, side beating and side beating; Gasoline engines should quickly rub grinding wheels, Lang the sound machine uses the thumb to quickly rub the roller from right to left;
6. If any impurities such as soot fall into burner accidentally during use, blow it hard in time to remove the sundries, otherwise it will cause bad fire;
7. Langsheng and grinding wheel lighter, for example, as soon as the Machine cover is opened, the gas starts to escape. Therefore, when the machine cover is not ignited, be sure to cover the Machine cover for storage;
8. This product is not suitable for lighting. Do not burn continuously for more than 1 minute to avoid scalding skin with high temperature;
9. Do not put the lighter in a high temperature environment (50 degrees Celsius/122 degrees Fahrenheit) for a long time, and avoid direct sunlight for a long time, such as the surrounding stove, outdoor closed unmanned carriage and trunk;

4. Common sense of lighter:(1) the lighter in our shop can be used repeatedly for inflation. Except Jiangsu, Zhejiang, Shanghai and land transportation, gas must be released before transportation. The product needs to be inflated before it can be used normally. (2) it is appropriate to use standard butane gas of 3.6~4.2 atmospheric pressure. Common brands include star brand, ailiqi, Honest brand, Dunhill gas, etc.;(3) when adding gas, shake the gas cylinder a few times first, turn the lighter upside down, insert the gas cylinder nozzle into the air inlet hole at the bottom of the lighter, (if there is external spray, rotate the gas nozzle appropriately to reach full contact), moderate press 2~3 times, be careful not to start fire immediately;(4) wait about 1 minute after inflation, and then try to start fire again. If it cannot catch fire, flame adjustment should be carried out;(5) optimal flame height: about 3.0cm, about wind-resist tool 2.0cm, and about 2.5cm for direct punching machine;(4) If there is no fire after adjustment, you can adjust the air hole to the minimum, then put the gas clean, then fill it again, and then slowly increase the adjustment. If there is another problem, it is recommended to replace the quality gas;(5) when the grinding wheel moves in the correct direction without obvious Mars, please replace the Flint;(6) pull out the middle frame part first, screw out the top screw with a screwdriver, take out the spring, pour out the remaining Flint, put in the new spare Flint, then put in the spring, tighten the screw, and insert the body into the shell.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

  alibaba