Product Name: hanger hook

product color: white, blue, brown

packing quantity: 400/box

box gauge: 55x35x30

product installation:

① Please wipe the wall clean before use.

② tear the product back protection film and stick it on the smooth and flat wall

③ press the surface of the hook hard for ten seconds, and use your fingers to completely drain the internal air.

④ After the air is discharged, the items can be hung, and the 24-hour hanging on back of ear is set, which is better.

Product disassembly and movement:

① gently uncover the edge of the hook film.

② slowly tear off the hook film vertically.

③ do not pull the hook directly for disassembly to avoid creasing the hook.

④ after tearing off, follow the installation instructions (listed above): You can reuse it.

⑤ when the hook is not used for a long time, please use a protective film to fit the film and store it so that it can be used again next time.

Note:

① when there is water, oil or wax on the wall, Please wipe it clean and install it.

② If the dust is not good, please wash the dust on the film with clean water and then blow dry or dry it with a hair dryer,

  no water. After cleaning, the original viscosity can be restored.

③ do not install on the surface where the temperature exceeds 50 degrees Celsius.

① be careful not to pull down during disassembly to avoid creases.

Requirements of traceless hooks on wall ( smooth Surface/non-smooth surface):

  this product is applicable 【 smooth surface】: glass, ceramic tile, acrylic plate, painted wooden door, flat stainless steel, metal plane, Mirror and other smooth surfaces.

  For example, in 【 non-smooth surface]; Please use auxiliary film,