Purpose:

       window glass; Sliding door glass; Wardrobe glass; Office partition glass; Wall sticking; Veneer; Furniture; Bathroom window glass; Bedroom window glass; Balcony glass; Office partition wall glass, etc. Transparent and opaque, can cut off the line of sight, soft light environment. Self-adhesive on the back, it is more firmly attached.

Usage:

1. Film sticking tools: ruler, scissors or art knife, wet towel, scraper (Oxford).

2. Use ruler and art knife or scissors to plant the film into the size of each position to be pasted (it is better to write down the size with pen paper).

3. Clean the place where the film is to be pasted with a towel, and then spray the glass surface with sprinkling can (in order to move the film after sticking it, it will not stick to it and cannot move).

4. Peel off the base paper by frosted film, stick it to the place to be pasted, align the corners and level it. Use wet towel to smooth the edge, wipe out the air and moisture between the glass and the film (inside) (if the frosted film is relatively large, do not remove all base paper, you can stick the edge to base paper). 5. After being smooth, after most of the air and water are removed, use a scraper to scrape on it, and scrape out all the air, bubbles and water. Don't use too much force, as long as the water and air can be completely scraped out.

6. After drying the water. Please 12-24 hours (the time depends on the weather, 12-24 is sunny and the sun shines) do not clean, move. Note: Some friends say that they are afraid that they can't tear it off after being pasted, so please use (30-40 degrees) hot water to heat it or blow it with a hair dryer to tear it off, I am afraid that there is glue on the glass (hot water, alcohol, gasoline, kerosene are available). These things will be cleaned as soon as they are torn off.