Additional tax points for invoicing, please contact Customer Service for details!

Name: Electric Shaver simple single size: 9.5*7 * cm (including box)

model: LK-8806 simple Package Weight: 190g (including box)

power: 4W simple packing: 80 pcs

voltage: 220V simple packing full box size: 56.5*38.5 * 52CM

net weight of the whole box: 20.4kg simple packing gross weight of the whole box: 21.5kg

package Weight: 300g

package product size: 16*8*19

package product carton size: 66*42*61.5

package quantity: 60 pieces

  retail customers: except Xinjiang and Tibet, all regions in the country are RMB freight of first stage weight. Xinjiang Tibet freight of first stage weight 15. Continue to calculate according to the template provided by the courier company, and the order ordering system automatically calculates.

[Product details]]

[Attachment] charging cable, brush, manual
[Function] pogonotomy

[Battery] 500 lithium battery
[Charging] 220V 50Hz 4W external charging plug, 3 hours charging,
[Performance introduction] rechargeable electric shaver

1. This electric shaver with double-ring cutter head can make you clean faster, easier and more effective. The cutter head can be close to the face according to the uneven contour of the face, making you feel more comfortable when shaving.
2. The blade is automatically ground blade net. When the shaver is working, the blade and the hard alloy mesh cover are constantly ground, which can keep the blade sharp frequently.
3. This model is used for the first time. Please charge it for 8 hours before using it. If you don't use it for half a month, you must charge it for 8 hours before using it. Make sure that the rechargeable battery does not lose power, keep the battery capacity so that you can prolong the life of the shaver.
4. The battery (1.2V) of this shaver is recharged for 500 times, and the capacity remains unchanged.
5. This shaver is a high-speed silver Palladium motor with long service life, low noise, high power and light vibration.

Razor tips

     1. The cutter head should be thoroughly cleaned every four weeks. After removing the protective film frame, spray special detergent 5cm away from the grid frame, and then use small brush to remove beard and dirt in the cutter head later.

      2. Use small brush to clean the cutter head, and use small brush to clean protective film to avoid damage.

      3. After each shaving, take off protective film shelves, tap a few times on the plane and install them again.

      4. Protective film cutter head protection cover on the back cover after each use to prevent protective film damage.

      5. To ensure a high level of razor, we recommend that you replace the cutter head and blade Net sets every two years.

6. In order to maintain the service life of the battery in the machine, razor is completely discharged during normal use every six months, and then recharged.

7. Because the face will expand slightly after washing your face, it is best to pogonotomy before washing your face. It is an ideal time to pogonotomy before getting up in the morning and washing your face.

8. When using the protective film Shaver, keep the shaver perpendicular to the face and hold the razor at a right angle of 90 degrees.

9. Because the beard grows downward, reverse scraping can make beard stand upright, which is easy to scrape clean, so reverse scraping should be done from bottom to top at pogonotomy.

10. When shaving, tighten the skin by hand. Do not push the cutter head hard. Just slide gently over the Hu District to clean the beard.

[Charging method]]

1. Be sure to use AC 220V/50Hz to charge
2. Turn off the switch, push out the charging pin and insert it into the power socket.
3. When the switch is not closed, it cannot be charged.
4. When charging, the charging indicator light is on.
5. The standard charging time is 2 hours.
[Precautions]]:

  do not charge in areas where the rated voltage exceeds 240V, otherwise it will fail.
  Do not charge continuously for more than 24 hours, and do not charge when the temperature is lower than 0℃ or higher than 40℃, otherwise it will shorten the battery life.
  Do not use washer body water or bring it into the bathroom for use, otherwise it will break down.
  When the body is dirty, you can use a soft cloth to apply neutral lotion for a test. Do not use alcohol or gasoline to wipe.
  When abnormal situations (such as smell, temperature and sound abnormality) occur during charging or use of the product, the power supply should be cut off immediately and the use should be stopped.

Correct use and maintenance of electric pogonotomy knives can not only achieve satisfactory pogonotomy results, but also prolong the service life of electric pogonotomy knives. Pay attention to the following aspects when using.
1. When installing the power supply, pay attention to the polarity of the dry battery or charger to prevent the motor from turning upside down, thus damaging the fixed blade and moving blade.
2. At pogonotomy, the fixed blade should be pressed tightly against the face slowly, and the beard should move against the growth direction, so that the beard can enter the mesh smoothly. If you move along the beard, it will overwhelm the beard, which is not conducive to the beard entering the mesh.
3. Electric shaver is not suitable for shaving long beard, so it is better to shave every 4 days or so. If the beard is long, you should cut it short with trim or small scissors first, and then shave it off with an electric shaver. If there is no trim or small scissors, you should use multiple shaving methods to touch the skin vertically with the fixed blade (mesh cover) and beard, and shave the beard shorter, then proceed according to the method of 2.
4. When the electric shaver with trim is in use, the blade of trim should be moved at a vertical angle with the face to clean the beard.
5. Once the rolling stop occurs at pogonotomy, turn off the power supply and restart it. After the motor rotates normally, continue to pogonotomy.
6. The fixed blade of the electric shaver is very thin, and it cannot be deformed or damaged by forced pressure.
7. For dry cell battery electric shavers, take out the battery after use or long-term lay up to avoid unnecessary corrosion and damage caused by moisture and leakage of the battery. AC type electric shaver should cut off the power supply and pull out the plug to ensure safety. Rechargeable Electric Shaver cannot discharge too much power. If the battery is insufficient, it should be charged first and then used. If it is up for a long time, it should also be charged regularly (about three months).
8. Add a small amount of lubricating oil to the bearing part regularly to reduce wear. Non-wet electric shaver, do not wash with volatile chemicals such as water or alcohol. If the blade of non-stainless steel material is not used for a long time, a thin layer of oil should be applied to the blade to prevent rust from damaging the blade.
9. After using the shaver each time, use a small brush to clean up the dirt such as fringe, and do not let the dirt pile up. Otherwise, the motor will be stuck or the transmission will be blocked. At the same time, shavings and greasy skin will affect the sharpness of the blade once it is cured on the blade.