Oil pressure cutting maching product Description]]

1. Four-cylinder and precision six-column automatic balance connecting rod structure can ensure that the cutting depth of each cutting position is exactly the same;

2. The operation adopts two-hand operation mode, button once, no disadvantages of continuous blanking for many times, and emergency stop device is provided to ensure safe operation;

3. Cutting pressure nozzle drops at a high speed, and automatically presses at a slow speed when cutting the die. When cutting multi-layer products, there is no size error between the upper and lower layers of the workpiece;

4. The cutting force fine-tuning device can quickly and freely obtain the best blanking pressure;

5. Type a adopts high stroke design, which is especially suitable for vacuum blister molding products and cutting of various low, medium and high knife dies and thick materials;

6. Due to the accurate cutting balance, foodstuff box cutting can eliminate the phenomenon of cutting board powder sticking box, and can also reduce the loss of cutter die and cutting board;

7. There will be no edge burrs when cutting environmental protection materials OPS,EPE,PET,ABS;

8. The automatic feeding device of linear slide rail can be selected, the feeding and returning materials are light and silent, the finished products are easy to put and take, and the safety is high;

9. Custom Specifications external size can be designed according to the actual application requirements of customers.

【 model parameters]]

【 scope of use]]

applicable industries: textile, automobile cushion, clothing, leather, footwear, sporting goods, leather case, plastic.

【 installation Instructions]]

1. Clean the stains of the upper and lower pressure plates of the equipment, and correct the oil pressure cutting maching to be placed horizontally;

2. The hydraulic oil inside the oil cylinder can be filled with 80%, and there is no need to fill it up;

3. If the power supply is turned on, 380V must be used. If 380V voltage cannot be used, special improvement can be made;

4. Mold debugging;

5. Debugging of cutting stroke, debugging according to the thickness of the workpiece plus the thickness of the mold.