Click buy		click buy		click buy		click buy		click buy

[Model] 20W hot melt glue gun

[Applicable] toy models, artificial flowers, Christmas trees, decorations, metal products, wood products, cardboard, printed circuit board bonding, etc......

[Specification] gun length 120mm (use a fine glue stick with a diameter of 7-7.5mm)

[Product features]]
1. This product uses high-tech ceramic PTC thermistor as the heating element, and the heating speed is fast. PTC thermistor has an automatic constant temperature. When the temperature rises to the design temperature of glue stick, it will no longer rise. It can prevent the damage caused by the heating element to glue gun, save energy consumption and prolong the service life.
2. The electrical insulation strength of this product does not break down when it is powered on 3750V/minute. It can be used normally in AC or DC power supply between 100V and 240V, and is not limited by voltage fluctuation. It has built-in safety fuse, it is safer to use.

[Usage]]
1. This series of products can be applied to rubber strips with a diameter of 7-7.5mm.
2. Insert the adhesive strip from the end of glue gun and send it to the end of barrel. Plug in the power and preheat it for 5-8 minutes. Pulling the trigger can extrude the Sol and control the amount of glue.
3. In the process of using, if you can't use one glue strip at a time, you don't need to take it out. You can plug in the power supply to preheat it for 5-8 minutes and then use it directly.

[Color] Sapphire Blue