[Specification parameters]

1. Product size: about 12.3x12.3x10.8CM

2. Material: ABS + AS + PET + electronic components

3. Packaging: Color box

4. Accessories: USB cable

5. Power supply mode: Built-in 1200 mA 18650 lithium battery, this product can be charged(Product with USB cable)

6. Input voltage: DC5V

7. Product power: 6.9W

8. Outer box information about: 53 x40x37CM/36PCs (packing number)/13.1KGS (gross weight)

9. The weight of a single product (including color box) is about 0.33KGS

10.1 Box (whole box) volume about: 0.078CBM

[Product graphics]

product features:

1. This product can USB charging, with USB charging cable.

2. This product has the function of warm night light, accompanying us to sleep.

3. This product has projection lamp functions, romantic and colorful.

4. This product has electrodeless dimming function.

Projection function instructions:

1. Align the hole position, according to the opening switch instruction can open or close the lamp cover, press M key for projection.

2. Projection Lamp button M description:

3. Except for projection lamp3 under any light condition except the gradual color change in seconds, long press the corresponding key,, the light will be100% gradient5% light and then stop, press the corresponding key again, light5% gradient100%, such a loop.

4. Projection lamp light belt memory function, switch the light and the light that is turned on after the shutdown, depending on the brightness of the last dimming. (3 second gradient color outside)

5. The charging duration of this product is about3 hours, use duration2 hours. When charging, the indicator light is red long bright, and when fully charged, the indicator light is green long bright.

[Tips]

1.6 children under the age of one should use it under adult supervision.

2. Do not disassemble the internal device by yourself to avoid damaging the parts.

3. When not in use for a long time, please place the product in a dry environment.

4. The light source of this lamp is irreplaceable; When the light source reaches its end of life, the whole lamp should be replaced.

5. When assembling the upper and lower lamp covers, the lamp covers are not screwed in place and cannot be fastened tightly.

6. Please do not exceed6 use on the inclined table to prevent dumping.

7. Please read the instructions before using;

8. Lighting, shooting, etc. may cause slight deviation between the color of the picture and the actual object. Please refer to the actual object.