Plentiful supply, custom support, and large quantity discounts

Due to the wide variety of specifications for water heating and sanitation fixtures, it is not possible to display all products on the website. If you have any further needs, you can contact us directly by phone, mobile phone, or online consultation through Alipay. We will provide you with attentive and professional service! We are willing to answer all questions about water heating and sanitation fixtures for you!

Boyi'er hoses meet your needs.
Product Name: 1.5-meter Anti-Twisting Shower Pipe

Length Specification: 150cm (Customizable to various lengths as per customer requirements)

Product features: resistance to tension, softness, elasticity, and good sealing performance.

Applicable Products: Shower Heads and Spray Hoses

Installation and Maintenance: The stainless steel outer tube is clamped with an inner tube, which is soft, flexible, and extends, so there is no need to worry about tube rupture.

Adopt the electroplating process, the surface is smooth, and try to avoid sharp objects to collide and friction to avoid affecting the beauty.

Common Standard Interface 4-Piece Interface, suitable for various shower heads and faucets.

Stainless Steel Material: Elegant Electroplating

Thickened nuts: robust

Rotary Joint


With a white lid to prevent dust from entering.
The interface is a universal 4-prong standard interface.

Suitable for all 4-inch interfaces shower heads

Don't worry, the interface will be compatible.

Installation and Instructions:

1. The place where this product is installed must have a floor drain and have smooth drainage.

2. Installation of this product requires professional installation.

3. Before installation, please confirm if the product length matches the distance to be connected. Do not forcefully stretch the product to connect.

4. The length of the pipe from the inlet diameter must be maintained, but it must not exceed three centimeters. If the product can only be bent due to site restrictions, the bending radius (radius) must be greater than 3R (i.e., three times the radius of the pipe), and fixed and protective measures must be implemented.

5. Both ends of this product are equipped with rubber sealing pads. Please do not wrap the raw material tape around the connection of the hose when installing.

6. When installing, it is generally only necessary to tighten the connecting nuts at both ends by hand (only if there is a leakage after connecting the water source, do you need to use a wrench, but it is forbidden to twist forcefully).

7. After installation, carefully check for any leaks at the connections to ensure that the system is functioning normally before using it.

8. Please do not use cleaning products to clean this product.

9. If you do not stay in the place after installation or will be away for a long time, please turn off the inlet valve of the soft pipe to prevent abnormal water pressure from causing damage to the soft pipe or other losses.