Budiproduct Display:

 Factory Introduction

1: First, place the fabric sticker where you want to attach it, with the hot-melt glue side facing the clothing. Do not remove the glue on the back, preheat the iron, iron the fabric sticker from the front for 10-20 seconds to fix the position. You can also use a needle and thread to fix the position of the fabric sticker before ironing to prevent the sticker from shifting.
Step 2: Turn the cloth stickers that have been fixed in place together with the clothing inside out, iron for 30-60 seconds from the back side, ensuring that the adhesive melts and the cloth stickers firmly adhere to the clothing.
3: Finally iron the front side for 1-2 minutes, mainly iron the edges and corners of the cloth paste, ensure the surface is flat and smooth, and perfectly integrate with the clothing.

Notes: Sequins, beads, rhinestones, silk flowers, and fuzzy balls are used in cloth patches, as well as those embroidered with metal threads. These patches should be ironed from the back first to ensure they are firmly fixed, and then the edges can be trimmed from the front to avoid damaging the sequins or other decorations. The clothing should be kept dry, and no steam should be sprayed onto the patches or the clothing when ironing. After ironing, the patches can generally be firmly attached to the clothing for a long time. If the patches fall off after a while or after washing, it indicates that the ironing temperature was too low or the ironing time was too short. You can repeat the original operation to iron the patches again, or sew them by hand to ensure they do not come off.