elderly beeper, doorbell, wireless doorbell, multi-function remote control doorbell

1: Product Features:

1. Humanized design, easy and flexible wireless installation, eliminating the hassle and additional costs during setup while not affecting the aesthetic appearance of the renovation.

A 16-bit encoding is used, with an error rate of one in 65,535, effectively avoiding the troubles caused by interference between neighbors.

The remote control range for 3 open areas is no less than 80 meters, meeting the requirements of high-rise buildings.

4. It features built-in dual stereo speakers that produce clear and loud sound, making it particularly suitable for use in special locations such as elderly care facilities, disability centers, and hospitals.

5. The transmitter consumes minimal power, with a built-in replaceable battery.

6. To meet the needs of elderly individuals with poor hearing or mobility issues during emergency calls for help, this product features large-panel buttons. Additionally, an LED lighting indicator function has been added.

Low voltage alert function.

7. The transmitter features LED indicators for guidance, large panel buttons, and waterproof design.

8. LCD Calendar Function.

II: Instructions for the installation and use of the transmitter:

1. When opening the package, remove the alarm transmitter.

2. Use a cross-screw knife to loosen the screws and open the casing of this alarm transmitter. Remove the battery insulation sheet, and send a signal using the alarm transmitter. At this time, the red indicator light on the alarm transmitter will turn on, ensuring normal operation.

3 alarm emitters can be attached to the neck or beside the bedside table of the person in need, or any other easily accessible location using the randomly included strap.

4. The alarm transmitter uses a CR2022 battery (including the battery).

5. When the LED light of the alarm transmitter is flashing continuously, it indicates that the CR2023 battery on the transmitter has run out of power. To ensure proper operation of the transmitter, it is recommended to replace the battery.

3. Instructions for the installation and use of the doorbell transmitter:

1. Open the package and remove the doorbell transmitter with a blue button.

2. Use a screw driver to open the casing of this transmitter, then remove the battery insulation sheet. Press the doorbell button to send a signal from the transmitter. At this time, the blue indicator light on the doorbell transmitter will turn on.

3. Installation of the doorbell transmitter: Use randomly distributed double-sided adhesive or screw nails to secure it.

4. User Manual for the receiver:

1. Open the battery cover of the receiver. Install three AAA batteries, paying attention to the polarity of the batteries.

2. The receiver must hold the separate “learning button” for 3 seconds upon initial power-up. At this time, the red LED light turns on, indicating that the receiver has entered a state to learn a new ID and clears the old one. The validity period for each learning session is 2 minutes. During these 2 minutes, if the red button’s alarm emitter is pressed, the red LED light on the receiver begins to flash, signifying successful learning. The device can only engage normal communication after successful encoding; in case of power loss, the encoding remains unchanged.

3. The receiver offers three functions to choose from: alarm, flashing light, and flashing light/Alarm function. When the alarm function is selected, a single alarm sound is played upon receiving the signal from the transmitter. When the flashing light function is selected, a single light flash is displayed when the signal is received. When the flashing light/Alarm function is selected, both an alarm sound and a flash occur simultaneously upon receiving the signal from the transmitter.

4. The receiver received a total of 9 urgent alarm sounds, which can be selected using the “Alarm Sounds” button.

5. The volume of the receiver alert can be adjusted via the “Alert Volume” button, with three levels available.

6. When the alarm sound activates, due to the prolonged duration (about 1 minute), it is harsh in tone. You can press the “Alarm Sound” or “Alarm Volume” button to stop the alarm sound.

7. Press the doorbell and alarm button in sequence, and the system will automatically switch based on the time difference.

8. When the receiver operates at a voltage below 3.6V, the red LED light will keep flashing. To ensure all functions of the product work properly, it is recommended to replace the battery.

Precautions:

1. Try to use high-quality alkaline batteries to avoid using ordinary carbon-zinc batteries with short lifespan and easy leakage.

2. Avoid placing the product in areas where it gets wet from rain or is exposed to direct sunlight for long periods of time, or near metal objects.

3. Non-professionals should not attempt repairs without authorization, to avoid damaging delicate electronic components.

4. Using this product correctly can effectively extend its service life.

5. The actual remote control range may vary depending on the usage environment.

5. LCD Function Description

1. Normal solar calendar display mode

2. Music alarm clock and sleep inertia function.

3. Timer Function

4. Temperature Mode