LED exposure lamp string perforation LED lamp, outdoor waterproof, can be arbitrarily shaped, colorful colors are monochrome color

One, waterproof LED lamp string characteristic:

1, LED lamp string, give full play to the advantages of LED point light source, any combination, so that the LED outer light, large outdoor LED advertising signs, LED electronic light box production more simple.

2, special bayonet design, drilling directly after installation, quick installation time.

3, all kinds of punching sheet can be used (e.g., electrolytic plate, aluminum plate, iron plate, stainless steel plate, etc.).

4, the use of Taiwan's famous LED chip, high brightness, color consistency of good, color saturation, long service life, attenuation characteristics of low, ensure the quality of products.

5, the parallel wiring, breaking the traditional "one does not light, the light is not bright" fault.

6, full-color lamp string, the use of intelligent control system, can produce gradual change, jump change, chase, scan, display and other graphic animation effects, and can realize the control of asynchronous and synchronous, random arrangement, meet the requirements of different users.

Two, LED outer light string:

1, working voltage: DC5V; DC24V.

2, LED light string color: red, yellow, blue, green, yellow, white, purple, orange, color, colorful, full color.

Three, waterproof LED lamp string use:

With LED lights string to do outdoor lighting, outdoor signs is to highlight the brand and fashion, greatly enhance the business scale and grade. Mainly used for: building roof, outdoor signs, KTV large hotels and other entertainment signs, store signs, door signs etc..

Four, the production of LED outer light character of the method steps:

1, LED outdoor signage tools: 40W or 60W electric iron, solder, electric drill, glue gun, screwdriver etc..

2, LED outdoor signs made of other materials needed: the word punching metal, wire, LED luminous characters Symphony power.

3, punching: (9mm, 12mm diameter, spacing is according to the outdoor brand system installation height and production cost, general led center to center spacing: 10 - 30mm, small spacing between China, high brightness between China, the higher the cost.

4, plug in: the hole to clean up the hole, one by one.

5, the connection: the has been made good connection and waterproof LED lamp string, each string is reserved for the thread, the received power of positive red and black thread received the cathode of the LED special power supply, the power to placed in power distribution box. (refer to the installation instructions)

6, test aging: all the LED after the good, check the processing is not bright, and then carry out the aging test for 48 hours.

7, transport to the scene, the scaffolding on-site installation.

Five, the use of attention:

1, LED lamp string voltage is DC5; DC24 please note that use of that type of voltage.

2, from the power supply leads to the cross-sectional area of the wire can not be less than 4 square millimeters (also can be 2.5 2).

3, the lamp string of the electronic line red received power of the positive electrode (some for 2, and after receiving the power supply).

4, the lamp string of the electronic line black received power of the negative electrode (some for 2, and after receiving the power negative).

5, such as the discovery of individual lights are not bright, please check the lights or lines, such as the light is not bright, please change LED.

LED full color waterproof exposed lamp 6, double color and colorful string is common cathode, anode controller.

Four line LED exposed water lamp 7, full-color Series in red as follows: positive, positive, negative, data, clock.

Box packing. Quality assurance for two years