Water Droplets Humidifier. Air Humidifier. Weather Drying Humidifier. Genuine Humidifier

Main Technical Parameters:
1. Bionic design, smooth and vivid lines
2 with negative ion device
3 - Water shortage automatically turns off power
4 加湿量 can be adjusted at will, and the mist is uniform.
5th-generation advanced noise suppression design, ultra-quiet operation
6-nanometer antibacterial technology, anti-mold, anti-bacteria
7-hour working time: continuous 7-12 hours

Adhering to the ISO9001 international quality system for the entire process of control, the product quality reaches the advanced level of similar products both at home and abroad, with a one-year warranty.

Power: ≤38W (adjustable)
Tank capacity: 2.5L

Aerosol volume: 50-300cc/har
◆ Applicable space: 10-100 square meters
Fog control: adjustable
Water Conservation: Yes
Air purification: Yes
◆ Fog temperature: Normal temperature
◆Noise: Quiet design, below 35 dB
Net Weight: 2KG

Adopting the principle of ultrasonic frequency oscillation, the water is converted into ultra-fine particles ranging from 1 to 5 micrometers. Through the air movement device, the water mist is dispersed into the air, thereby achieving the goal of uniformly humidifying the air.

Health Knowledge

Winter indoor humidity in the north: 20-30%
Human health humidity: 45-70%.

Use Caution:

   1. The first time you use it, you should leave it at room temperature for half an hour before turning it on.
  
2. The use of environmental temperature is lower than 40 degrees.
  
3. Use clean water with a temperature below 40 degrees.
  
4. Keep away from other household electronics when the machine is operating.
  
5. Do not add non-professional production line or supervised additives to the water.
  
6. Do not place the humidifier on empty objects to prevent the generation of resonant noise.
  
7. Do not turn on the machine without water.
  
The Art of Maintenance:
  
1. Use normally, stop immediately if a fault occurs.
  
2. Clean the humidifier once a week, and do not immerse the machine in water when cleaning. The water temperature for cleaning should not exceed 50 degrees.
  
3. Do not use detergents, kerosene, alcohol, or other cleaning agents to clean the body and components of the machine. Do not disassemble the components on your own.
  
4. Clean the transducer with a soft brush; clean the sink with a soft cloth, once every two weeks; clean the sensor with a soft cloth; and clean the tank by filling with water and shaking it two to three times before emptying.