Product features 1. Built-in charge free of maintenance, capacity up to 1300mah, lead acid battery. 2. Ultra-long life battery, over 250 cycles of charging and discharging. 3. Adopt ultra-high-brightness, environment-friendly, long-life, high-power, ultra-strong, and small 1 watt LED light, with low power consumption and long lighting time. 4. Select a special heat-resistant reflective cup, which has a longer range than ordinary flashlight, with more concentrated light and stronger brightness. 1. Fully push out the ac plug with both feet when charging, and directly plug it into the ac110v-220v /50Hz power socket (corresponding charging indicator will be on). The sufficient power needs about 12 hours (charging is recommended during the day). 2. When using, push the switch key forward, with 2 lights on in the middle, and 1W lights on in the top gear. When stop lighting, push the switch key backward. 3. Sufficient electricity, two lights can be used for 40 hours continuously; The small 1W lamp can be used continuously for about 15 hours. Torch should be charged frequently, do not use for a long time. If not used regularly, please recharge for more than 10 hours every three months, otherwise the battery life will be reduced. Flashlight should be charged frequently, do not use for a long time. If not used regularly, please recharge for more than 10 hours every three months, otherwise the battery life will be reduced. Quality assurance our products comply with company standards: Q/XYSD 002-2009. The warranty period is 3 months from the date of purchase. 1. In order to guarantee service life, please charge the product normally once before use. 2. If the light is dim, please recharge in time. 3. Do not directly shoot the eyes with the flashlight, so as not to affect the eyesight (children should be used under the guidance of adults). 4. Do not use the switch when charging. Please put the switch in the closed state to avoid burning the power supply and internal components. 5. The maximum charging time shall not exceed 15 hours. The yd-8922 Specification a. With more than1300 MAH high memorial capacity hermetical rechargeable lead acid Battery. B. The long life Battery is able to be circularly used 250 times between charge and Discharge. C. With low 1 w leds of high brightness, long life, more focus beam. D. using special reflector With high temperature to hold, the more focus beam, further lighting range, More brightness. The User 's Instruction Amy polumbo ush the plug-in perfectly when you charge it. Insert it directly in the socket with AC110-220 - v / 50 hz and the charging indicator lighting. Keep charging about 12 hours. 2. When using, push the switch forward, weak light working, push the switch forward further, strong light working, if stop working and then push the switch backward. (3) with full charging. Flashlight should always be charging before the usage.In ordet to protect the battery,if the lamp does not be used regularly, Quality Guarantee Our products are meet with the requirements of standard Q/XYSD 002-2009. It is Guaranteed for the Quality problem by3 Months from the purchase date. And any damage caused by operation is not included. D. Please charge the battery immediately when the light is dark. C, As not to affect the vision, Please do not directly clap eyes on the LED lights(Children must be affected by adults) Off the light when at the 'to get any inner parts or the power are burned. The e.P lease put it away from the inflammable and explosive dangerous goods when you charge up the'. Don 't Charge the battery exceed 15 hours.