Factory Direct Sales Supply TV Amplifier Ctav TV Amplifier 20sb3

Xiamen Jiemai amplifier, distributer
* Xiamen Jiemai amplifier uses imported CATV amplifier devices for design.
High frequency bandwidth, large dynamic range, strong anti-interference ability; low power consumption, stable performance. It effectively improves the clarity of the image.
* Gain flatness, good linearity, low noise, significantly improves signal quality;
* Aluminum profile shell, good shielding performance, high isolation, strong anti-interference ability, good heat dissipation;
* Each output signal can be directly used by televisions and computers.
The purpose of a magnifier
*Cable TV signal line is too long, causing signal attenuation, picture with snowflakes, not clear
* The same cable distribution system connects multiple televisions, and the signal strength is insufficient.
After multiple distribution in the living room or room, the cable TV signal suffers severe attenuation.
The computer text and image stock information reception system can reduce the rate of information error and improve the speed of reception.
*Family. Building. Shopping mall. Hotel. Guest house and other places can be used
Professional device design. Low noise. Wide frequency band. Suitable for current analog channels and future digital signals.
The use and precautions of an amplifier
The installation location of the amplifier should be as close as possible to the cable TV branching point under the condition of allowing, and it is better to install in a position with little attenuation to ensure that the signal source has a higher signal-to-noise ratio, resulting in clearer images.
The manufacturing process of *F connectors: please refer to the instructions on the packaging box (the core line and shield line cannot be short-circuited), if you are unable to do it, feel free to contact us, we can help you to connect the F connectors and short leads, with a favorable price.
*If the installation is not satisfactory, please check: is the power supply connected; is the feeder, connector, distributer, or splitter in good contact.
* Amplifier, Branch, and Distributor Differences:
The empty word amplifier is a device for amplifying electrical signals.
A blank word branch is an electronic circuit that, when the main output signal passes through successfully, divides one or more equal signals with a lower electrical level than the main output signal.
A signal divider is an electronic circuit that can evenly divide a signal into multiple paths.
*Note that indoor-type equipment should be properly waterproofed and damp-proofed when used outdoors.