Product name: Gudeli Hot Melt Glue Gun Series 60W.

Usage Method

1This series of products can be used with diameter-appropriate rubber strips.
2. Insert the adhesive tape into the glue gun at the end, and push it into the gun tube. Plug in the power and preheat for 5-8 minutes. Then, pull the trigger to squeeze out the adhesive, and you can control the amount of glue.
3. During use, if a whole rubber band is not used up at one time, do not remove it. You can use it again by plugging in the power and preheating for 5-8 minutes, then use it directly.

[Color]: The photos are taken from the actual items, and we try to maintain the original colors without using any software to change the colors. If you cannot accept any color differences, please consider this carefully before making a purchase!

[用途]：Suitable for various clothing, DIY hair accessories, hair bows, and adhesive products!

1The use of voltage 100~240V, frequency 50~60Hz.

2This product is a high-temperature glue gun. It should be used with the corresponding size of the glue tape according to the product series. If the user uses glue tape of the wrong size or type, it may lead to the meltback of the glue and damage the glue gun.

3The nozzle of the hot glue gun and the melted adhesive are at a high temperature, so do not touch it with your hands; it is prohibited to use it in places with flammable and explosive materials.

4When using a glue gun, do not lift it high, and the nozzle should not be pointed upwards. If you do not use the glue for 15 consecutive minutes, please turn off the power to prevent the glue from melting backwards and damaging the glue gun.

5Due to the addition of durable materials in the glue gun, there may be a smoking phenomenon upon initial use. After 30 minutes of use, the smoke will automatically dissipate.Eliminate.

6The gun tail slider should be kept clean to ensure that the seal can be smoothly inserted into the barrel.

7Do not pull the glue tape out of the glue gun from the rear.

8The glue gun should be placed in a well-ventilated and dry place when not in use. It is prohibited to place it in wet or water-logged areas, and it is prohibited to place it where children or children can reach.

9This tool must be placed on its stand when not in use.

10Please do not replace the power cord without authorization. If you need to replace the power cord,