fumigator home sauna sweat steam bath tank home sauna room steaming bucket steam bath steam sauna

Installation Method:

 1. Installation Method of Steam Engine
1. Open the packaging box and carefully remove all the components from the box.
2. Connect the steam engine hose to the bath tank entrance.
3. Pour clean water or diluted essential oil solution into the storage bottle.
4. Set the steam pot to the right time.
 
II. Usage Method
1. First, connect the electric air pump to the "outlet hole" of the steam bath box and inflate it. Once it is basically full, immediately cover the outlet hole tightly, and then supplement the steam into the "inlet hole" until the air column in the steam bath box is fully inflated, but do not overinflate.
2. Then seal the air valve, ensuring that the bath is fully inflated to prevent it from collapsing. Unzip the zipper and place a chair inside. Only after the temperature is suitable can you enter.
3. Connect the steam tube correctly to the steam box (short tube to the exhaust box, long tube to the evaporator). Add clean water to the water tank, making sure it does not overflow. (You can add essential oils, milk, and other liquid steam materials.) Then insert the water tank's tube into the steam machine. (Make sure it is unobstructed.) Pay attention to tighten the connection of the tube.
4. Plug the power cord into a household 220V power outlet and turn on the switch. The power indicator light will turn on.
5. Before steam is generated, set the time and temperature level manually or remotely to your satisfaction. After checking that all the accessories are correctly installed, you can enter the steam box to wait for the steam bath therapy. If it feels too hot during use, you can lower the level.
6. Zip up the front zipper of the bath bucket to insulate on both sides. You can extend your hands to read newspapers, books, and enjoy a wonderful sauna at home. It is best to use for 20-30 minutes.