Professional supply lightweight portable blue, green. PVC double air cushion

Brand: hikers
Product name: double automatic air cushion

Size: 188 * 110 * 3 cm

Materials: features:
- comfortable to use.
- the material is durable.
- easy to use, carry and store. .
Volume: 60 * 58 * 28(cm)/6pcs                  
Gross weight: 14 kg  13 kg net weight:

Front: 190T polyester cloth: middle: sponge PU

【 goodspackaging】:Roll up the ribbon and tie it into the same color cloth bag 

【 goodsaccessories】:Patch pack(in case the mat is damaged accidentally, it can be repaired)

[product color]:Blue, green

Operation method:
Open air cushion. Twist air nozzle cover to make air cushion expand automatically. Tighten the air nozzle cover, fold the air cushion repeatedly, then squeeze it hard for a few times, then twist the air nozzle cover, let the air cushion expand automatically, so that it can fully recover its elasticity and shape.

Gas filling:  

   1. Open the air cushion and twist the air nozzle cover. The air cushion will start to expand automatically
Two. According to their own comfort level to adjust the fullness of the air cushion.
Note: if the mattress is kept in a rolled-up state for a long time (not recommended), the nozzle or air pump can be used to help the cushion expand and restore its elasticity.

Exhaust:
1. Open the air nozzle and roll it up from the other end of the nozzle to push out air.
2. Close the air nozzle, roll up the air cushion by the other end, and open the air nozzle again to discharge the remaining air.
Finally, close the air nozzle cover.
Note:Please place the bag inside to avoid scratches.

Storage method:
Open the air cushion, open the air nozzle, and place it in a cool and dry place, because the sponge in the air cushion has a memory shape and can quickly expand into the most commonly used shape.

Repair method:
1. Confirm the place of air leakage: close the valve after blowing air expansion, wet the surface with water, fold it in half, and press it with your knee to pressurize with your weight. The foaming place is the place of air leakage, please mark it.
2. Small hole repair: completely dry the air cushion, drain the air, and drip the product's self-matching glue on the hole. As the air is exhausted, the glue will be sucked in to seal the hole. Then let the glue harden.
3. Big damage repair: completely dry and deflate the air cushion, apply glue on the patch of repair cloth, apply glue to the holes on the surface of the air cushion bed, dry it for 30 seconds to 3 minutes (depending on the temperature), stick it in the damage area, press it flat, and keep it for 4 hours before use.

Cleaning method:
Inflate the air cushion to its maximum limit, tighten the air nozzle cap, use a soft brush and a low-irritant household degreasing cleanser or detergent, rinse and dry thoroughly.

Notes:
Keep away from sharp objects (prickly plants or sharp rocks or blades).
Two. When the tent is not used, please lay the base cloth under the air cushion.
Do not use it as a float.
Stay away from flames or sparks.
5. When the temperature is high, do not put the air-filled cushion in the car or tent.
Do not use sunscreen or alkaline medicines.
7. Do not insolate in sunshine for long, ultraviolet ray can let the material of its surface damage slowly.
8. Keep out of the reach of pets.
Nine. The air nozzle part is hard, should avoid it in the rest.