handbag high pressure bag plastic bag cloth bag handbag packaging bag gift bag

The simple difference between high-pressure membranes and low-pressure membranes is that high-pressure membranes are designed to operate at higher pressures, typically above 100 psi (pounds per square inch), while low-pressure membranes are designed to operate at lower pressures, typically below 100 psi.

The high-pressure film feels quite soft, and the sound when rubbing is relatively quiet, with a certain luster.

The low-pressure membrane feels quite hard, and when rubbed, it makes a rustling sound...

Specification:Customize according to the size provided (e.g., height ** width, side width, or bottom width **).

Thickness:The thickness of the plastic bag is two layers (in threads): 1 thread = 0.01mm. For example, 5 threads, 8 threads, 10 threads, and so on.

Specific explanation

1. Thin bags: The total thickness of the double-layer bag wall is less than 5 silk, commonly known as "thin".

2、Medium-thick bag: The total thickness of the double-layer bag wall is between 6 silk and 11 silk, which is considered 'medium-thick'.

3. Thickened Bag: The total thickness of the double-layer bag wall is classified as 'thickened' when it is between 12 and 19 filaments.

4. Extra-thick bag: A bag with a total wall thickness of 20 or more filaments is considered "extra-thick."

The average clothing bag is about 10 deniers, while the vest bag is about 5 deniers. For higher-end clothing bags, the deniers are about 15.

Printing:Everyone can provide the patterns and text needed for printing, and the design of printing (such as single-color single-side or two-color or multi-color printing, etc.) can be designed according to requirements.

Quantity:The minimum order quantity for the standard specification is 10,000 pieces, and the more you order, the more favorable the price will be.

Due to the fact that custom-made plastic bags are produced by machine feeding, the final production quantity may deviate from the order quantity by +/- 5%. However, we will settle the account based on the actual quantity of goods shipped to you. If there is only a slight excess of a few dozen or a hundred, we will...FreeFor you.

打样:It's best to order tens of thousands of plastic bags to produce a prototype. Because even if you make just one, the setup cost, printing, and machine costs are the same for several thousand. So if the quantity is low, it's recommended not to produce a prototype for the client.

Production Cycle:The shipment will be made 8-10 days after the confirmation of the manuscript, with the specific time to be determined according to the actual situation.