In order to ensure safety, all products of the water pump have undergone strict inspection and testing. Please install the instructions and warnings in this manual to prevent the water pump from being damaged.

Description:

l The entry of obstacles or dirt in the water pump will reduce the use effect of the product. If the water pump is dirty, take out the water pump to clean up the dirt.

l clean the water pump, remove the front cover and water leaves, wash the dirt with a small brush or running water, and pay attention not to move the shaft of the water pump.

If the pump does not work, verify as follows:

l check whether the circuit is damaged and change another input power to ensure that the pump is powered on;

l make sure there is no dirt at the inlet;

l take out the rotor to ensure that the rotor is not damaged or in the shade.

Note:

l power off before use;

l do not dry;

l do not directly use the power cord to pick up the water pump;

l do not operate in hot water;

l work in clear water.