multifunctional tool clamp multi-function plier multifunctional engineering pliers outdoor supplies emergency multifunctional cutter

Product Name: Multifunctional Tool Clamp

Material: Stainless Steel (Imported)

Surface: Advanced stainless steel with blackening treatment

Size: Stretched - 16.8 cm, Contracted - 13 cm

Weight: 0.22KG (excluding the nylon sleeve)

Attachment: Special Black Nylon Protection Case

Color: Black

Function Description: A total of 15 types. The following is the explanation:

1). Pliers with pointed tips

2.) Blasting Cap Crimper
3.) Cut the wire at the cut-off point

4.) Remove the insulation from the wire clamp

5.) 尺(厘米与inch)
6.). C4 explosive punch

7.) Cross-shaped screwdriver

8.) Can opener 9.) Main knife

10.) Bottle Opener
11.) Double-sided File

12.) Large Flat Head Screwdriver

13.) Small Screwdriver

14.) Nylon Storage Case

15.）Rope Hole

This sharp-pointed tool clamp has sold in considerable numbers worldwide. It uses the principle of inertia, allowing you to easily swing the clamp head out with a simple motion, making it truly convenient and useful. It is fully functional and suitable for daily life, whether for survival in the wild or as a temporary substitute for tools.

This tool clamp shell is black with a matte finish, which makes it less likely to reflect light. It is also used by some military units in the United States, making it a favorite among military enthusiasts.

Clamp mouth, tool switch sequence

Normal operation of the jaws - simultaneously press down both release buttons on both sides, and the jaws can be smoothly slid out upwards, separating from the handle body, until it reaches the locking position (during this process, do not grip the handle tightly to prevent obstructing the sliding of the jaws).
Quick-action jaws - when operating with one hand, grip the handle firmly, and swing your wrist downwards, with the jaws facing the ground. Centrifugal force will cause the jaws to slide, and once they are locked in position, you can use them. (During this process, do not grip the handle tightly, as this may impede the jaws from sliding.)
Tool operation - fully extend the handle, select individual parts, and open the tool to the appropriate position (before using the parts, ensure they are fully secured in place), then close the handle and retract the jaws.
Tool closure - simultaneously press the upper and lower release buttons, slide the jaws out, fully extend the handle, and then, with one hand, press the patented Saf.T.Plus safety lock system towards the interior, followed by slowly returning the rotating tool parts to their original position, allowing them to be retracted back into the handle.

Daily maintenance and maintenance

A multi-function tool clamp is made of high-carbon steel 440 or above, featuring durability and reliability. Since it is a metal product, it requires some simple maintenance. After contact with saltwater, chemicals, or sewage, it should be cleaned with clean water and applied with high-quality oil-based lubricant, otherwise it may rust. After use or after touching by hand, appropriate maintenance with rust-preventive oil and lubricant is recommended, and long-term inactivity also requires thorough maintenance to maintain the best working condition of your multi-function tool clamp. The tightness of the tool switch can be adjusted with a standard tool clamp, and if a part of the multi-function tool clamp is damaged or broken, you can replace the new part by first removing the screw seat supporting the part, and then replacing it with the new part.

Special Warning Instructions

1. It is strictly prohibited to use more than one component at the same time. Such incorrect operation may cause harm to the user and the tool clamp (important! Please do not try, and do not use more than one part at the same time).
2. The safety device's main function is to remind consumers to use the 'blocking latch' with caution. It is strictly prohibited to apply excessive force. Incorrect operation could cause harm to both the user and the safety device.
3. Before using the knife and other tools clamp, it is necessary to close the handle of the multi-function tool clamp and slide the clamp mouth back into the handle.
4. The knife must not be used as a screwdriver, chisel, can opener, or pry bar.
5. Do not strike the handle or parts, and do not throw the tool clamp. Twisting, cutting, or excessive force will cause damage to the tool clamp and may cause serious harm to the user.
Tool clamps are very durable, and with proper use, they can maintain their effectiveness for many years.