Hot Melt Gun, dispensing Gun, Glue Gun

This product uses high-tech ceramic PTC thermistor as the heating element, which heats up quickly. The PTC thermistor maintains a constant temperature automatically; it stops rising once the temperature reaches the designed level for the glue gun. This prevents damage to the glue gun caused by overheating of the heating element, saves energy, and helps extend its service life.

This product is primarily used for toy models, decorations, and metal products. Also for cardboard, electronic circuits, etc.

1. It must not be used in environments with flammable and corrosive gases.

2. Do not tap randomly, otherwise the lifespan may be reduced due to contact with the wire.

3. After being used several times, the copper rod should be removed to remove the oxide layer, to prevent the problem of difficulty in removal over time.

4. Do not place the soldering iron in a damp area to prevent moisture-induced electric leakage.

5. Use a 220V±10% AC power supply. When connecting the power cord handle, do not allow the cord to rotate with the handle to prevent short circuits.

6. The insulating layer of the power cord should be replaced promptly if damaged, to ensure safety.

7. The power cord is a three-conductor soft cable with grounding, and it must be grounded during use.