Product features:
1. The built-in charge is maintenance-free, with a capacity of up to 7000mah and lead acid battery.
2. Ultra-long life battery, over 250 cycles of charging and discharging.
3. Stable constant current and constant pressure switch power charger is adopted, with more stable performance and higher safety coefficient.
4. Adopt aluminum reflective cup, with better heat dissipation and spotlight effect, no deterioration or scratches, and brighter brightness.
5. Adopt ultra-high brightness, concentrated light, environmental protection, long life, 10W T6 LED light, low power consumption and long lighting time.
6. This product is elaborately designed with flashing warning function, applicable to construction site, accident prone area, night or foggy day, etc.

Matters needing attention
1. To ensure service life, please charge the battery normally once before use.
2. If the light is dim, please recharge in time.
3. Do not directly shoot the eyes, so as not to affect the vision (children should be used under the guidance of adults).
4. Do not use the switch when charging. Please keep the switch in a closed state to avoid burning the power supply and internal components and ensure the battery life.
5. Charger configuration requirements: DC output voltage is 5.5v,DC charging interface is 5.5mm in diameter, and charging current is 800ma.
6. Do not short circuit the output jack of the charger, otherwise it will cause electric shock, smoke and damage to the charger and products.
7. Please keep away from inflammable and explosive goods when charging, and the maximum charging time shall not exceed 15 hours.

Instructions:
1. When charging, plug the charger into the ac power supply of ac110-220v /50HZ, and then insert the connector of the charger into the corresponding socket at the searchlight handle, at this time
The corresponding red indicator light is on, indicating that the battery is in the charging state; When the indicator light on the charger changes from red light to green light, it means the battery capacity is full. Please connect the charger
The searchlight and power are turned off, and the full power takes about 15 hours.
2. When using, press down and turn on the key ON1, the first level of weak light illumination, the second level of strong light illumination, the third alarm function, the fourth level of lights off, and so on. At the same time, press on the key ON2, the first step 8 LED lights lighting, the second step stop lighting, the third step 8 LED lights warning function, the fourth step stop lighting, and so on.
3. ON1 function when sufficient power is available: the weak light illumination of the searchlight can be used for 60 hours continuously, the strong light can be used for 12 hours continuously and the warning function can be used for 100 hours continuously; ON2 function: 8LED can be used for 60 hours continuously, and alarm function can be used for 100 hours continuously.
Insert the car charger plug into the light jack, and insert the other end into the socket under the probe handle. The charging indicator lights up. (requirements: DC output voltage 5.5v,DC charging interface diameter 5.5mm, charging current 800ma.)
Searchlight should be charged frequently, do not use for a long time. If not used regularly, please recharge for more than 10 hours every three months, otherwise the battery life will be reduced.

Quality assurance
Our products comply with corporate standards: Q/AYSD 002-2011. The warranty period is 3 months from the date of purchase.
(products damaged or burnt due to abnormal use are not included in the warranty.)