1: remove dead skin, use dead skin push to start from finger edge manicure for removing dead skin (before shoveling dead skin, soak it in hot water first, and macerating agent on the last layer of dead skin to facilitate the place of dead skin), use cuticle nipper to remove the shovel from cuticle Nipper. (Removing dead skin is the key part to do a good job of Barbie nail. If the dead skin is not removed clean, it will easily become warped if you do a good job of UV nail) 2: There are two positions for manicure and manicure, one is to polish the surface of the nail, the surface of human real armor is smooth and has Grease. It must be polished quickly, or UV nail will not stick firmly. (Note: the correct method of carving and grinding is to hold the nail and rub the front edge vertically to carve the vertical provisions on the nail surface. Pay attention to carving and grinding in place, otherwise the Barbie nail produced will fall off easily) 3: use dusting brush to remove dust after grinding. 4: Put on balance liquid, clean your hands with soap and clean water first, and after your hands are thoroughly dried, apply a layer of nail balance liquid on your nails, and dehydrate nail art bed to dry for about 30 seconds. 5: Apply base gel (agglutinant) to the surface of the carved and ground nails. Light shines for about 1 minute. 6: It takes about 2-3 minutes to go to UV Polish light for the first time, scrub with quick-drying water after light, and 2-3 minutes to go to UV Polish light for the second time, and scrub with quick-drying water after light. 7: On nail lacquer, light 2-3 minutes. After light, scrub with quick-drying water.

Correct nail polish coating method

step 1: disinfect. After correcting the correct shape of the nail at Polish strips, wash your hands and wipe the nail surface carefully with alcohol pad.

Step 2: Put on base coat and apply a layer of calcium base coat to the nail surface to dry. Base coat can keep the color of nail polish longer and help prevent pigmentation. When the upper base coat, the brushing sequence of the middle and the two sides should be followed.

Step 3: coloring available, shake the finger nail polish hard first, stick a proper amount of bristle with nail polish (the first time should be less or not more), gently try it at the bottle mouth, and adjust the smoothness of bristle, when applying nail polish, the action should be fast. After three strokes are finished, first apply from the middle of the nail root to the nail tip. The brush is slightly flat and Bruch head is slightly pressed, when brushing the color, nail polish oil brush should leave the soft leather part slightly. Be careful not to touch the color on the soft leather. After touching the soft leather, you can touch the cotton rod with nail polish remover to wipe off the excess nail polish.

Step 4: Secondary coloring. Most Nail Polish secondary coloring can make the color more full and lasting, fully showing its true color. Note that the brush should be light and thin when it is painted for the first time, and it can be thicker when it is painted for the second time. Generally, nail polish falls off from the top of the nail. Therefore, Manicure brush on the top of the nail can avoid this phenomenon.

Step 5: apply bright oil and finally apply a layer of bright oil to make the color of nail polish more shiny and lasting, especially sequins nail polish. Adding a layer of bright oil can prevent sequins from falling off.

Step 6: quick-drying, the simplest way is to use quick-drying spray to quickly dry nail polish. You can also use a hair dryer, or immerse your fingertips in ice water to speed up the drying speed. You 'd better not wash your hands with hot water before drying out, so as not to lose luster nail polish.

Manicure advice

1: When removing makeup for nails, you must choose professional nail polish remover, because the inferior nail polish remover are mostly blended with acetone, and the taste is very pungent. Try to use tasteless nail polish remover,
2: Apply dark color nail polish, and it must be washed off after a week, because no matter how good the nail polish is, if it is covered for a long time, it will also cause burden and damage to the nail surface.
3: Some MM often complain that their nails are not long or easy to break if they are long. It is recommended to use calcium base coat appropriately, which will improve after a period of time.
4: When trimming nails, it should not be cut too hard and too short, otherwise the dead skin on the nail will grow faster.
5: nail polish diluent try to avoid using, because adding too much diluent will make the gloss of nail polish worse, accelerate volatilization, and reduce the adhesion of nail polish.
6 keep nail polish in a place that is too hot. Tighten the lid to prevent volatilization. It is best to put it in the refrigerator.