For other styles or more choices, please click our website below:

 our website→(Yinlong Electronics)← the most professional manufacturer

safety instructions:

① do not put the laser into water or wet places.

  ② do not drop the laser from high altitude or squeeze it violently.

③ place the laser in a place that children cannot reach.

④ do not use laser to irradiate eyes.

⑤ do not light the laser for a long time. The lighting time should not exceed 3 minutes at a time.

Battery handling:

① If you do not use the laser for a long time, remove the battery. ② If the laser is not used for a long time, the battery should be charged before use.

③ Please use the battery provided by the manufacturer or use the battery of the same specification to avoid damage to the laser caused by improper use of the battery.

④ do not make the battery in the overcharge and overdischarge state. When the laser is used, the light brightness is darker than normal, please charge it in time,

please use the charger with overcharge protection provided by the manufacturer when charging,

to avoid battery damage

  material: hard aluminum

appearance surface treatment: anodized black

switch Mode: light touch switch

battery: 18650 rechargeable battery (delivered)

wavelength: 532nm; Start time ≤ 3 seconds

working voltage: DC3.7V

adjustable focal length with optical port and safety lock protection

size: 150mmX% 23mm

to achieve the above effect, you must adjust the focal length! Only in this way can the best effect be achieved. New friends will have a certain adaptation process because they feel unfamiliar. They need to patiently experiment to adapt to the length of time determined by each player's own quality and have no direct relationship with this product! Every product has been measured before being sent out, which can achieve the effect promised by the seller!!

Battery installation:

① unscrew the back cover of the laser indicator. ② take out the battery and prepare to place it.

③ place the negative pole of one 18650 or 16340 Battery inward, align it with the spring inside, and then twist the back cover. (Note: Use 123A battery to twist extension tube down; Use 18650 battery to twist extension tube down)

④ use the key to open the tail switch lock, the Green Point is open, and the red point is closed.

Indicator operation:

① hold the green laser indicator in your hand and press and hold the indicator touch switch with your thumb. The indicator will emit green light.

 ② After the operation is completed, the hand will be released naturally, and the indicator will be in the closed state.

③ When not in use for a long time, the switch lock must be closed.

Focus function operation:

① after the laser pointer is turned on, the focusing head rotates to the right, the light spot gradually becomes larger, and the closer the focus is; Rotate to the left, the light spot becomes smaller,  the farther the focus is.

② focus recognition method: rotate the focusing head to the right to make the light spot bigger. Look at the light column side, and the thinnest point of the light column is the focus.

 For other styles or more choices, please click our website below:

 our website→(Yinlong Electronics)← the most professional manufacturer