Range: 200g/0.01g

2. power supply: 1 button electronic

3. the various unit conversions: g TL CT oz

"Product features"

1. the high-resolution backlit

2. peeled weight, variety of weighing display

3. go to zero, the function of automatic shutdown

4. have brownouts and overloading function

5. display: LCD display white automatic backlight

6. self testing, automatic checking machine functions,

7. high precision, high definition, high resolution

Deduction/peeled how to operate:

1, power on go to zero;

2, place the buckle weights on the scale;

3, pressing the Peel key shows 0.0 or 0.00 indicates a deduction;

4, then add the items to be weighed, when reading is net items

Correction:

Then started up quickly press and hold the m button down, until CAL appears in the open, and then click m 100.00 appears (200.00 or 500.0 appears corresponding models, etc) in the sky, put the display on 100g (200g or 500g) weight 2 seconds to appear, such as PASS shutdown saves win weights

Notice for use:

1, the largest weighing no more than the maximum amount of lift.

2, overload will permanently damage the product.

3, the product is not exposed to very cold or very hot weather conditions, this product is in a normal environment can work well, prior to use, make products in a new environment fit for at least an hour.

4, prior to use, power on the scale's internal components warm up scales weighing times, this makes weighing precision.

5, place the product in a clean environment, dust, moisture, vibration and air, or electromagnetic interference may have adverse effects on the stability and accuracy of the product.

6. gently, weighing objects when gently placed on the scale, so as to avoid inaccurate weighing or damage the scale's internal components.

7, because the product is a high precision products, so it is very careful handling to avoid vibration or falling.

8, in use on a stable horizontal surface without wind.

⊙ And please ensure that no electromagnetic interference in 50cm around so as not to affect the accuracy

⊙ 10-30 ℃ environment use, excessive temperature difference may cause error

Troubleshooting:

Weighing the primary factor for inaccuracy or failure low battery, incorrect calibration, overload or operate on non-level surface. Please note that the above mentioned several points, with correct use and maintenance of your product.

1, do not display or displays a low battery symbol "Lo" need to replace battery

2, "EEEEE" overload, overload items should be removed immediately;

3, "o_ld" due to error that scales the internal core part is damaged (for example, impact, dropping or overload), please try the calibration again, if the sensor is not badly damaged, then recalibrate after use.

4, display 88888, in one plane of vibration, stability work.