Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
| red with black lines | CN¥ 0.0 |
Yiwu Jiayuan Industy Trade Firm 14yr.
Contacts Zhang Bishun Chat
Mobile 86-15857933678
E-mail ZBSZJC678@163.com
15857933678
"Product Name": 500ABattery Clamp CableEmergency Tie Line
【Product Description】:
Don't worry if your car won't start because it's out of battery. Just call a taxi from the side of the road and have it driven over to the front and back to jump-start it. Cars rarely run out of battery.Please provide the Chinese text you want to translate, and I will translate it into English for you.But once in a while the battery runs out.Please provide the Chinese text you want to translate, and I will translate it into English for you.Really drives people crazy..Not afraid of a million" 或者 "Not afraid of a thousandPlease provide the Chinese text you want to translate, and I will translate it into English for you.just in casePlease provide the Chinese text you want to translate, and I will translate it into English for you.It would be better to bring a battery clamp..without any worries.
【Product Specifications】:100Aand200Aand300Aand400Aand500Aand600Aand1000AWait
【Product Material】:PVC
【Product Packaging】:Foreign Trade Export Packaging
【Usage Instructions】:
1. The following is the connection procedure:
(1First, clamp the red wire of the start line.“Rescue vehicle"The red battery positive terminal is above.
(2Then clamp the other end of the red wire.“rescue vehicle”The red battery positive terminal is above.
(3Clamp the black wire.“Rescue vehicle'On the black negative battery.
(4Then clamp the black wire."rescue vehicle"On the black negative battery.
(5Start first."rescue vehicle"First, turn on the engine, and then start it."Rescue vehicle"The engine. If the rescued vehicle still cannot be started,
Please check if the metal contact parts are not in good contact.
Note: After starting the engine, it is still necessary to remove the starting jumper wire in order, or there may be a risk of a short circuit.
Steps for Disconnecting Wiring:
(1"Firstly, put"Rescue vehicle"Remove the black wires.
(2Then again"rescue vehicle"Remove the black wire.
(3)然后将"rescue vehicle"Remove the red wire.
(4Finally, put"Rescue vehicle"Remove the red wire.
This model is a 5.00ABattery cables are exported for packaging.
【注意事项】:
1When the car's battery is dead and it cannot be started, it can be used to start another vehicle by connecting to its battery. The bold battery jump start wire,
The maximum passing current is 5.00AMP,一般适合排量在2500cc以内的汽油发动机或者排量在2000ccwithin" 或者 "within the range of
The use of diesel engine batteries.
2Two cars must not have any contact, and the electronic systems of the two cars need to have the same voltage. If the battery is frozen, please do not
Use this startup wire.
3Before connecting, the engines, sound systems, and air conditioning of both cars need to be turned off.



Update time:
TOP