Pneumatic nail gun F50B
F the longest nail, 5 mm guns volume 55 * 250 * 250, mm, 1.43 KG
On a 100 PCS all can be put on (1.55 mm to 50 mm)

Directions for use:

1, this Nailer is used for wood mouldings, wood recycling operations such as old lumber, building templates.

2, before using drops some Lube from the fitting, fitting connected to the compressed air.

3, suitable for single nail onto homework, as well as no or limited continuous nailing connected and fixed situations.

Note:

1, you can use only compressed air working pressure must not exceed 0.8MPa;

2, prohibited the use of inflammable and explosive gases such as oxygen, prohibited by high pressure air compressors to power sources;

3, before use, make sure that air compressor pressure gauge accuracy to prevent overpressure damage;

4, the use of nail guns Please wear safety goggles and protective gloves in order to ensure the safety of the operator;

5, Staples should be removed when the air connector, cut off of gas supply;

6, spear pointing to himself or any other person is strictly prohibited, so as not to cause harm;

7, operation, is prohibited close to flammable and explosive goods, do not cause serious corrosion, rust and dust and other harsh work environments;

8, non-random beats fall touch, not random air guns;

9, fails to immediately disconnect air supply, withdraw all clip nails, maintenance.