This series wire rope electric hoist has two types, fixed type and trolley type. The fixed type are divided into A1, A2, A3, A4 four types, they can be installed on the frame directly. The trolley type can be moved can install on the rail. CD1 is single speed lifting equipment, while MD1 always have double lifting speed which is normal speed and slow speed.

We mainly manufacture capacity 0.25-32t, lift height 3-30m series electric hoists; also we can design special electric hoists as your requirement.

Application:

Trolley electric hoist can be installed with most cranes or hang on the joist steel girder, lift cargo in straight line or curve line; fixed electric hoist can be installed on fixed support and lift cargo with vertically or with different angles.

This series electric hoist applies to industrial enterprise, mining company, normal factory, workshop, railway, sea port, warehouse, stock ground and so on. This is the ideal equipment to improve working efficiency and working conditions nowadays.

Operate Conditions:

Working temperature: -25-+40 degree

Work moisture: <85%

Elevation: <1000m

No fire, no explosive goods, no corrosion medium.

Forbidden to lift melting metal, poisonous, explosive, flammable goods. The working duty is medium, when using when the working duty is level up, the rated lift capacity should be reduced accordingly (20% per level).

Transmission and Working Principle

CD1 and MD1 electric hoists are mainly composed of three parts: lifting mechanism, travelling mechanism, electrical parts.

Wirerope motor hoist Hoisting /Lifting mechanism

Lifting motor drives rope drum rotating through coupling and hollow shaft of reducer, which makes the wire rope on the rope drum driving the hook unit up and down.

If lift height is 6m, a claw coupling is used to link the motor shaft and input shaft of reducer.

If lift height is or more than 9m, intermediate shaft and rigid coupling are added.

If lift height is or more than 18m, a carriage is used to enhance the rigidity of intermediate shaft.

Lifting motor

Lifting motor uses tapered rotor motor with strong staring torque to adapt frequent direct staring in the intermittent work.CD1 type hoist uses ZD type single speed motor and MD1 type hoist uses ZDS type double speed motor. The ratio of ZDS type motor's constant speed and slow speed is 10:1

Speed reducer

Cap 2t hoist uses straight tooth planetary gear reducer and the rest are using helical gear three stage reducer. Gear and shaft are made by alloy steel and high carbon steel and through proper heat treatment to ensure its reliability and service life. Box body and cover is made of cast iron to ensure hoist's good damping performance and reliable sealing.

Wirerope motor hoist Rope Drum

Rope Drum is made of cast iron or seamless steel tube, using/with the help of spline transferring power. The sell of rope drum is welded with steel plate.

Rope drum is the central heart of a hoist. The upper side is linked with traveling mechanism through equalizing beam. Both ends are connected with lifting brake and motor respectively. The lower side works together with hook through wire rope. Up front of the cover, limiting stopper guide-rod and heavy punch stop block are installed.

Lifting hook

Lifting hook is forged with specialized steel.In the use of trust ball bearing, lifting hook is linked with sheel through hook beam making lifting hook go slick. If lift capacity is five ton or less than five ton, slide wheel is single. If lift capacity is ten ton or more than ten ton, slide wheels are double.

Wirerope motor hoist Traveling mechanism

Traveling mechanism is made of electric crab, traveling motor, traveling reducer, driven crab and so on. Main engine hangs under the traveling mechanism moving reciprocatlly. The normal traveling speed is 20 or 30m/min. If the lift capacity is 1~5t and the lift height is or more than 12m, another driven crab is installed.

Electric device

The electric device of CD1 MD1 model hoist consists of electric control box (No electric control box, if the lift capacity is 0.25t), button switch, Limiting stopper, connecting wires and so on.

The normal operating voltage of button switch is 380V or 36V. Pressing the correct button can control the hoist through controlling on and off of the relay in the control box, according to the direction symbols on the button switch.