plastic spike raised signage double-sided reflective spike traffic facilities products road deceleration spike

Product Name:Plastic studs

Made using Japanese technology, the prism-like reflective plates are mounted on plastic or cast aluminum bases. They are primarily used for marking roads, highways, and exits, serving as a reminder and warning to drivers in poor lighting or at night.

Installation Instructions:

1. Installing safety isolation measures is of utmost importance; everyone must not overlook this. Throughout the construction process, whether for new roads or existing roads in operation, all personnel should be within safety facilities. If working on an existing road, the ratio of safety personnel to installation personnel should be 1:1. For roads not yet in operation, the ratio should be 1:3.

2. Determine the installation location and ensure it is flat. For roads with expansion, gaps, or uneven surfaces, the road surface must be smoothed out in advance.

3. Clean the installation area thoroughly with a brush, and ensure it is dry.

4. Take an appropriate amount of glue and evenly apply it on the studs.

5. Press the road stud firmly into its installation position to ensure the correct orientation.

If there is too much glue, make sure to clean it up thoroughly;

6. After the road studs are installed, a inspection should be conducted within two hours to ensure that none of the road studs are installed backwards, incorrectly, or compressed.

7. After the road studs have cured for 4 hours, remove the installation isolation measures.

About Us: All products can be negotiated based on quantity. Address: G2-1 4596, Yiwu International Trade City, 2nd Floor, 11th Street, Gate 42. Phone: 13575964833, QQ: 947711612, 923287576
Customer Service 1

Back to Home Page