X Email Mobile
EXW Price: |
|
Jinwei Flashlight Firm 13yr. |
|
Main Products: |
Strong strong flashlight head lamp lantern light emergency light rechargeable flashlight. Lantern. Dry cell flashlight. Aluminum Flashlight |
Contacts: | 朱金伟Chat |
Mobile: | 86-15868909885 |
E-mail: | 294147844@QQ.COM |
WeChat: | 15868972251 |
Address: | 14615 , 5 Street, 2 F, 35 Gate, International Trade Mart (District 2). |
Note: the above price is the price of a single torch. If you need a suit (including color box, 18650 lithium battery and universal charger), another 11 yuan will be added!
Product picture display:
Product introduction:
Maximum brightness (maximum luminous flux): 180-350 lumens
Change gear method, thumb light end switch can change gear.
Product description:
1. Material:Aerospace grade reinforced aluminum 6061, CREE xml-t6Fine workmanship and high strength.
2. Good tightness and good life waterproof. It can be used in rainy days.
3. Orange peel finish cup is designed to make the spots more soft and perfect. It is suitable for mid-range exploration lighting and has good effect of focusing.
4. Use 1 section 18650Battery-powered, portable, and adaptable to a variety of lighting options, is the most dazzling portable outdoor lighting product currently available, CREE imported from the United States LED life can reach more than 100,000 hours.
5. The battery life can reach more than 5 hours (the specific time depends on the battery and gear).
6, Mainly used for outdoor activities (mountaineering, camping, hunting, etc.); Professional requirements (such as jewelry appreciation, stone gambling, etc.); Suitable for family planning.
Instructions for torch operation:
Instructions for switch operation
1. The battery is positive towards the inside (the light head side), negative towards the outside (the rear).
2. At the end of the switch, the switch function is the switch function and the light adjusting function is the light adjusting function.
2. Instructions for the circuit board
1. The flashlight of our store adopts advanced constant voltage current technology, which can effectively solve the LED flashlight's demand for constant voltage current;
2. Special tips:
Do not use overpressure, and the voltage shall not exceed 4.2v.
Do not reverse the positive electrode of the battery, otherwise it will burn the board.
Pay attention to control the temperature change of the torch to ensure heat dissipation;
Please do not open the circuit board unless you are a professional.
3. Warranty description: open or treated the circuit board is no longer under warranty.
Instructions for lithium battery
1. The battery mainly USES 18650 lithium battery;
2. Characteristics of lithium battery: the charging mode of lithium battery is totally different from that of mobile phone battery; Lithium batteries have no memory and can be used and charged at any time.
3. Charge for the first time for at least 4 hours, and then follow the green light of the charger.
4. The natural discharge rate of lithium battery will release about 1% or less of its charge per day when it is not in use. Although it is slow, it will be kept for too long.
5. Pay attention to waterproof, moisture-proof and anti-fall of the battery;
6. Special tips: use the \"three-proofing\" charger with anti-overcharge, anti-reverse connection and anti-short circuit;
7. If the battery is not used for a long time, the battery shall be fully charged and saved, and the battery shall be charged and discharged again normally within three months or so;
8. Warranty description: no longer warranty scope after leaving the factory.
Instructions for torch operation
1. When using the flashlight, select the voltage and battery according to the requirements of the torch. Do not use the battery indiscriminately to avoid burning the circuit board.
2. In use, turn off the flashlight when the brightness of the flashlight changes significantly, so as to prevent over-discharge of the battery;
3. Heat dissipation skills: during the operation of the torch, ensure heat dissipation. Strongly request battery full charge time, had better use second, such can let the lamp head of flashlight and battery get extend product life! Holding the torch with your hand is a good way to dissipate heat.
It is suggested that when the flashlight is put on, it should be cooled or turned off in time according to the heat condition of the flashlight, and then lit up after the temperature falls, so as to dissipate heat.
4. Strengthen precautions against the instruction of waterproof and shock resistance of the flashlight;
5. Keep the inner wall of the lamp cup clean and never wipe it with hands or hard objects; Clean the fingerprint on the lens and wipe it gently with a cotton swab and lens cleaner.
6. Do not direct the flashlight light into your eyes, which is very bright and dazzling, so as not to affect your eyesight, especially children;
7. If the flashlight is not used for a long time, remove the battery (for a month or longer) to avoid chemical corrosion.
V. protection instructions
1. Do not make long-term contact with sunlight, water, chemicals and corrosive gases to avoid damaging the protective layer of the torch:
2. In order to keep the \"O\" ring and thread spinning smoothly, wipe the petroleum jelly oil on its surface 2-3 times per year.
troubleshooting
1. Check the battery: ensure that the battery is energized and loaded in the correct direction. The battery of different brands cannot be used.
2. Check the tail cover: ensure that the switch is tightened and in good contact, and that the copper column of the tail cover is in good contact with the metal sheet of the tail cover;
3. Pay attention to whether the lamp holder is loose.
Because this product brightness is very high, close range direct to the eye may make the person dazzle dazzle, please be sure to keep the torch, do not let the child direct to the eye.
TOP
Items have been added to the Inquiry Basket
There are items in the inquiry basket