oil gauge diesel gasoline flow meter liquid car sensor tanker accessories hardware tools

Main Products:

Hardware tools auto repair tool pliers monkey wrench combination spanner socket combination hammer iron scissors pipe pliers tire pressure gun ratchet wrench axe utility knife cable clamp glue

Contacts:

huangchangyongChat

Mobile:

86-13750974129

E-mail:

1136165542@qq.com

WeChat:

13750974129

Address:

68018,68034, 8 Street, 4 F, 100 Gate, International Trade Mart (District 5).

Related items

Description

Mechanical flow meters are used for measuring fuel volumes when not for commercial use, with reliable quality, low cost, and ease of installation and calibration.
Aluminum shell (internal thread 1 inch) threaded connection;
4-position single-use fuel capacity, can be manually reset to zero; 8-position total accumulation without reset. To reset to zero, you need to disassemble and reset.

Size Specification: Length 200mm Width 130mm Height 145mm

Before leaving the factory, the flow rate may be slightly different. Please test the flow rate before using the product to avoid any economic losses.

canAdjust the mechanical meter FM-120. Measurement accuracy ±1%

This mechanical oil meter is suitable for non-commercial use for oil measurement, although it is not the best or most precise device, it offers good value for money with high measurement stability. It is suitable for oil measurement in construction sites or within enterprises. It is worth recommending. If you are looking for a more precise electronic oil meter, please contact the shop owner. To maintain the cleanliness of the oil and extend the service life of the meter, you can also purchase several high-precision filters from our store. Please note to protect the machinery and extend the service life by adjusting the internal screws after removing the external screws. The net weight is 2.5KG, which is easy to install and calibrate. The accuracy error is ±1%, and it is convenient to adjust the screw to correct the range, which can be adjusted freely according to the size. The operation is simple. In addition, please note that when adjusting, you should first remove the external screws, adjust the internal screws, and then restore them.

Maximum working pressure: 3 bar Maximum flow rate: 120 L/MIN Aluminum housing, 1 inch thread with flange connection, flange installation hole distance: 62mm, hole diameter: 8mm Single fuel capacity: 9999 L Full capacity automatic reset, can be manually reset to zero individually, total cumulative: 8-digit, cannot be directly reset to zero. If you need to reset to zero, you must manually disassemble the mechanical parts to reset to zero.

Fuel Type: Gasoline, Diesel, Kerosene, etc. Different fuels may require slight adjustments to the instrument accuracy. To adjust, remove the screw cap, loosen the screws, and then turn the locking screw counterclockwise to reduce the amount of oil output and increase the number of revolutions. Turn the locking screw clockwise to increase the amount of oil output and decrease the number of revolutions. After adjusting, reinstall in order. It is recommended to use a national standard measuring bucket for metering testing.

Update time：20221009115745