infrared alarm domestic alarm

Product Introduction:

This remote infrared alarm system integrates an infrared detector and an alarm, along with a wireless remote control and power supply to form an alarm system. Once the infrared detector detects unauthorized human movement, it immediately activates a high-decibel siren to emit a 30-second on-site alarm sound, serving as a powerful deterrent. The alarm uses specialized infrared sensing processing chips, PIR dual-element thermal infrared sensors, Fresnel lenses, and advanced digital remote sensing technology, along with low-power specialized integrated circuits and automatic temperature compensation technology, and is controlled by a microprocessor decoding technology. It detects infrared thermal energy emitted by human bodies to activate the probe and sound alarm on-site, effectively preventing theft in a timely manner.It is an ideal security device for various vehicles, homes, malls, offices, courtyards, and along-street shops.YesModern family, shops, enterprises and institutions, business travelers staying in hotelsThe essential security product for theft prevention.

Product Features:

1. Infrared Detection
2. Long-distance multi-channel wireless remote control, with two original remote controls, following the same principle as television remote controls.

Technical parameters:

Alarm Sound Level: 105dB
Remote control distance: 5-10 meters (open area)
Detection range: about 7 meters

Working Voltage: AC 220V (requires a self-contained transformer), DC 6V (can be equipped with 4 AA batteries, requires personal purchase)Using dedicated modules consumes very little power.

Installation Requirements:

The remote infrared alarm system should have a clear line of sight over the protected area and there should be no obstructions.
◆Installation should avoid placing the infrared alarm near heat or cold sources, such as air outlets from air conditioners, heating devices, or cold air blowers, and avoid pointing directly at the door.
The remote infrared alarm should be installed at an angle of 10~30 degrees from the wall, at which point the detection range is the farthest. When actually installing, adjust the installation angle according to the situation.
◆Due to the remote infrared alarm's highest sensitivity to infrared detection when the human body moves laterally relative to the lens, while sensitivity to longitudinal movement is poor, it is important to pay attention to the angle of the detector's horizontal plane and height when installing. These factors have a significant impact on the protection area.

Usage Overview:

After the installation and setup, when the switch is turned on, the owner can leave the sensing area within the time of delay operation, approximately 15 seconds, and the device will enter the working state. If someone passes through the sensing area, an alarm sound will be emitted. To prevent the alarm sound, avoid the sensing area when turning off the device. The sensing range is a fan-shaped area with a horizontal angle of 110 degrees and a vertical angle of 35 degrees, similar to the viewing range of a camera video. If there is no movement within the sensing range, the device will not make a sound. The normal sensing distance is about 7 meters. The sensing range and distance can be adjusted according to personal needs. When using, pressing the remote control button will make the main unit beep once, indicating that the device has entered the defense state. After a delay of about 10 seconds, if someone is detected in the defense area, the device will immediately emit a high-volume alarm for 30 seconds. After pressing the remote control button, the main unit will beep once, indicating that the device has entered the defense state, allowing people to move in the defense area. During the alarm, you can stop the alarm immediately by pressing the remote control button within the effective distance.

Usage Method:

1. Turn on the power switch, and the power-on indicator light will blink once to indicate normal self-check.
2. Remote infrared alarm will enter a 10-second standby delay after power-on. If no alarm signal is detected within 10 seconds, you must leave the detection area of the machine within this time.
3. If anyone enters the detection area of the infrared alarm after 10 seconds, the remote control infrared alarm will have a 5-second delay, which is convenient for the owner to identify. After 5 seconds, if no signal from the identification remote control is received, it will emit a loud alarm sound for 30 seconds, with a volume of 105 DB. After the alarm sound ends, if someone touches the remote control infrared alarm again within 5 seconds, it will again alarm, and this will continue to repeat.
4. When the remote infrared alarm is triggered, you can turn off the power switch using the remote control to stop the alarm.

Installation Guide:

1. The probe should avoid directly facing the door and window to avoid false alarms.
2. Adjust the detector's tilt angle to achieve the greatest detection distance.
3. The Finnel lens of the probe should be kept clean and there should be no obstructive objects.
4. The probe should be kept away from heat and cold sources, such as air conditioner outlets, heaters, air conditioning units, etc.
5. The system enters a guard state within 10 seconds after power-on, and if an intrusion is detected, it will alert within 30 to 50 seconds.
6. Open the battery cover and insert the 4 AA batteries according to the markings on the inside of the battery compartment.
7. When installing and using the device, avoid direct sunlight and car headlights, as the movement of curtains may cause false alarms.
8. Install it at the corner of the wall or on the wall surface, and it is recommended to install at a height of 2 meters from the ground. Adjust the down-looking angle to prevent false alarms caused by small animals.
9. Fix the remote infrared alarm device on the universal base, rotate the infrared alarm device to meet the installation requirements and detection needs.

Notes:

When the remote control distance shortens, please replace the battery.
● When installing batteries in the detector, it is necessary to regularly check whether the battery leaks.
● Suggest you regularly check the infrared alarm system to ensure it is functioning normally to avoid false alarms.
● Detectors should be waterproof, windproof, and protected from direct sunlight exposure. They should be kept away from indoor sources of heat, such as air conditioners and fireplaces, to prevent false alarms.
● When the power-on indicator light is dim, the alarm sound becomes softer, and the infrared alarm device has a high false alarm rate, it is generally due to insufficient battery voltage. In this case, it is necessary to replace the battery in time.