Patented SOLDIER/display stand bike wall hook
// can move old hooks
Attachment: 4 metal screws and 4 expansion pipes.
30 kg
This type of bicycle hook material is solid, good steel quality, sufficient thickness, self - weight550 g; The overall design is good, with 4 screws fixed, evenly distributed between the main body and the top. The left side of the main body is designed with reinforcing bars, which will not be bent by the bicycle. The right side shield is small in design and does not block the front wheel when placing and removing the vehicle. Hook front arc large, hook Angle appropriate, front wheel will not fall off. The rubber sleeve is long and protects the rim. The main body and the hook are welded in two parts with high strength and durability.
Installation and use: choose the location of the bicycle in the room. Place the product at the right height and position to ensure that the bike reaches the right height and position after being upright. According to the position of 4 screw holes in this product, punch holes in the wall. Note that the thickness of the drill bit should match with the expansion sleeve, preferably after the hole is punched, the feeling of stuffing into the expansion sleeve is tight. Insert 4 expansion sleeve with 4 screws to fix the product on the wall. If the installation technology is limited or the wall quality is not high, it is recommended to check the screws regularly.
