dwarf windmill water resin crafts

Remarks: 1Add an appropriate amount of water to the bottom of the product to submerge the small pump.
2Connect the water pump to power and it will work.
3Change the water every two weeks and clean the water pump once.
4The removable and washable parts of the pump and the method are shown in the following figure:

Read Before Buying:

1. Before purchasing the product, please carefully ask any questions you want to understand. The shop owner will patiently and carefully answer any questions you have about the product.

2。ProductRemove from the packaging, do not rush to connect the power, please first place the product flat on a flat surface, and then assemble it.

3。First, insert the outlet of the water pump into the soft tube inside the product, and then place the product's water-holding base into the water. Fill the base with water until the water level is about two centimeters above the water pump.

4。Turn on the power, as the product is used for the first time, there may be residual air in the pump and hose, resulting in a small amount of water flow or water with bubbles. Please wait for a moment.

5。If the water output is still too small after a moment, please unplug the power cord and check the pump. There is a water level adjustment switch on the side of the pump. Adjust it to the maximum, and then replace the pump.

6。Adjust the water flow size according to the actual needs until the best effect is achieved. Before all manual operations, please ensure to disconnect the power plug to ensure your safety.

7。Please check the water level in the product base regularly and add water in time to ensure that the water level exceeds the pump. Due to the different levels of dryness in different regions, the water addition cycle will vary, depending on the actual region.

8。After using for a long time, it may be found that the water output is smaller, which is because there are impurities in the water or inside the pipes. It is necessary to clean and maintain the pump and the product to maintain the cleanliness of the water in the base basin.

9。When cleaning, unplug the power supply and then remove the pump from the hose. At this time, it is important to hold the hose with one hand and the pump with the other, or you may risk causing damage by exerting too much force.The tube and product are separated.

10。When the pump is cracked or damaged by other uncontrollable external forces, do not continue to use it. Please replace the new pump.

11。Due to the fragility of resin crafts, they are easily broken during transportation, so we do not support returns. If there are any quality issues, please contact us within three days of receiving the goods. We offer exchanges within three days of arrival (no exchanges will be made for any reason after this period).nbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbsp nbspnbspnbspnbsp""Resin Fountain/Office Decor" product introduction is as follows:Based on the principle of low profit and high volumePlease read the product description carefully before making a purchase to avoid any unnecessary disputes. We wish you a pleasant shopping experience!