with great efforts" 或 "with all one's strengthHot melt adhesive parameter instructions:
Melt viscosity: (pa.s/180°C) 9~11
Softening point: (OC) 80~85
Curing time: (s/25 OC) 8~12
Tensile shear strength: (N/cm2) 300~350
Temperature: (OC) 160~180

Application:
To be used with a hot melt glue gun, suitable forPlastic, metal, wood, paper, electronics, furniture, leather, crafts, shoe materials, coating, ceramics, lampshades, pearl cotton, food packaging, speakers, etc. Adhesive to high-grade toys, handmade products, hair accessories, Christmas products, long-haired toys, ceramics, cloth toys, fixed electronic parts, PC board, etc., can be widely used in factories and homes.

【Appearance shape】: Bar-shaped, rod-shaped.

Color: Transparent;Yellow; red; cream white, can be custom-made according to sample.

【Product Features】:

1High-temperature resistance, softening point.120Degree, melting temperature reaches160Degrees above.

2Excellent flame resistance.

3. Suitable for various types of electronic components, with excellent adhesiveness.

4Excellent oil resistance and chemical resistance.

5. Tasteless, environmental friendly.

6. Solvent-free.

【Product Application】:

This series of hot melt adhesive strips (hot melt adhesive rods) and hot melt adhesive particles have passedSGSNon-toxic detection applications are wide-ranging, and the following products can be adhered under the following environments:

1. High-temperature resistance for adhesive requirements.

2. The requirement for flame resistance in adhesives.

3. High-strength adhesive for demanding applications.

4. Electronic component adhesion.

5. Suitable for various types of plastic and metal materials.

Specific application in"Uninterruptible Power Supply"，即不间断电源供应系统Servo, computer motherboard, television combination, integrated circuit, automotive circuit integration, and other electronic components of products such as adhesive and fixed, such as motherboard, capacitor, resistor, electromagnetic coil, electronic wire, coil, and copper, aluminum, stainless steel, iron parts.ABS, PVC, PETPlastic items also have excellent adhesiveness.

【注意事项】：

1The series of hot melt adhesive strips (hot melt adhesive rods) will absorb moisture in the air. Due to the appearance, it is impossible to determine whether it has absorbed moisture. If the series of hot melt adhesive strips (hot melt adhesive rods) contain moisture, they are prone to bubbles when hot melted, which will reduce the bonding strength. Therefore, after use, seal it to prevent moisture.

2This series of hot melt adhesive strips (hot melt adhesive rods) and hot melt adhesive particles are solid state in strip or particle form, non-toxic. There is no special safety disposal required. However, when the hot melt form of this series of hot melt adhesive strips (hot melt adhesive rods) and hot melt adhesive particles are present, they should be prevented from touching the skin to avoid causing burns.

3In the event that the skin comes into contact with the melted form of this series of hot melt adhesive strips (hot melt adhesive sticks), immediately rinse with cold water. Do not peel the adhesive off the skin surface and seek immediate medical attention.

Usage Range:
Applied to plastic, metal, wood, paper, electronics, furniture, leather, crafts, shoe materials, coating, ceramics, lampshades, pearl cotton, food packaging, speakers, etc. Adhesive to high-grade toys, handmade products, hair accessories, Christmas products, long-haired toys, ceramics
Products, cloth toys, fixed electronic parts, PC boards, etc.