Product Name: Shanglian 20W Small Glue Gun

Model: SL-603

 1. Working Voltage: AC100V-240V This product uses high-tech ceramic PTC thermistors as heating elements, which allows for fast heating and accurate temperature maintenance.

2. Product Application: 1. Toy models; 2. Artificial flowers and Christmas trees; 3. Decorations and metal products; 4. Wooden products and cardboard; 5. Electronic circuit boards.

 3. Usage Method:

1. Insert a 7mm diameter adhesive tape into the nozzle of the glue gun from the tail, plug in the power, preheat for 5-8 minutes, and then press the trigger to extrude the melted glue.

2. During use, if a whole roll of adhesive tape is not used up, do not remove it. You can plug in the power and preheat it for 5-8 minutes before using it again.

Attention:

1. This product is a high-temperature glue gun. If the user uses glue strips of incorrect size or type, it may cause the glue to reflux and damage the glue gun.

2. The nozzle of the sol gun and the melted glue strip have high temperatures, so do not touch them with your hands. It is prohibited to use it in places with flammable and explosive materials.

3. When using a glue gun, do not lift it high, and the nozzle should not be pointed upwards. If no glue is applied for 15 consecutive minutes, please turn off the power to prevent the glue from melting backwards and damaging the glue gun.

4. Due to the addition of durable materials in the glue gun, there may be smoke emitted upon initial use. After 30 minutes of use, the smoke will automatically dissipate.

5. It is necessary to maintain the cleanliness of the gun tail slider frequently to ensure that the adhesive tape can be smoothly inserted into the gun barrel. It is prohibited to pull the adhesive tape out of the adhesive gun from the rear.

6. When the glue gun is not in use, it should be placed in a place with good ventilation and dryness, and it is prohibited to place it in a place with moisture or water. It is also prohibited to place it in a place where children or children can reach.

7. This tool must be placed on its stand when not in use!!