• Instruction Manual

1.Fix the compass to a relatively open area on the car or ship, and try to keep it level. Start using it until it reaches a stationary state.

2.compass:To read the product's reading, simply look at the scale indicated by the pointer on the product's dial.

3. The screw of the compass is used to fix the compass to the desired position on the car or ship body. The key piece is used to adjust the NS and EW holes under the base of the compass to adjust the pointing deviation of the compass. The green film is a double-sided tape used to adhere the compass to the car or ship body position.

The compass's built-in power cord can be connected to vehicle or boat power sources to supply the power needed for the compass's built-in light.

• Maintenance and Maintenance Instructions

Attention to the use and storage of the compass

This product uses liquid damping.Please provide the Chinese text you want to translate, and I will translate it into English for you.Please do not leave the product in direct sunlight for a long time.Please provide the Chinese text you want to translate, and I will translate it into English for you.In order to influence the compassPlease provide the Chinese text you want to translate, and I will translate it into English for you.thermometerPlease provide the Chinese text you want to translate, and I will translate it into English for you.The normal functioning of a hygrometerPlease provide the Chinese text you want to translate, and I will translate it into English for you.Exposure to direct sunlight can cause the product to develop abnormally large blisters..

Metal objects can affect the interpretation of the compass, so it is best to keep away from vehicles, cameras, or other metal objects when performing positioning or interpreting directions. Metal interference can affect the interpretation of the compass.20to60Degrees, therefore, must be very careful. The magnetic field area will also affect the accuracy of the compass.

When storing a compass, it is important to note the location, and do not place it in an area with strong electromagnetic effects, such as not directly above a speaker's horn, as the electromagnetic field above the speaker is quite strong. Additionally, leaving it in direct sunlight can weaken the magnetism of the compass needle, which is not good for the compass.