Laser Stamp Engraver MT-2020

The first USB interface laser stamp engraving machine - uses USB 2.0 interface, stronger anti-interference ability, and more stable performance; completely get rid of the trouble of the new generation of computer motherboard without printing interface. On the basis of stability and reliability, it continuously updates technology, and is widely used in stamp making, craft engraving, electronic and electrical industries, etc. It has the advantages of simple operation, fast engraving speed, standard font, clear stamping, etc. It is also one of the high-tech products that combine traditional stamp carving technology with laser and electronic technology. Due to the selection of power stable, ultra-long life laser tube and imported lens combination, the life and reliability of the ZT series stamp engraving machine have been greatly improved.

Technical Indicators

Model MT-2020
Laser power
Interface method USB2.0
Support software - Moshi
Operating System: Windows 98/2000/XP
Total machine power: 300W
Model size: 81×51×27cm

Performance Features

1. Large character library capacity, standard font types, and a rich and varied selection of fonts.
2. Fully computer controlled, with high degree of automation.
3. Achieve what you see, fully reflecting the design requirements.
4. Suitable for a variety of non-metallic carving, with a wide range of applications.

Applicable Scope

Stamp Making: Able to directly carve bullhorn stamps, organic glass stamps, plastic stamps, and rubber stamps, etc. Pattern Making: Able to carve names, specifications, and various patterns on organic glass and electronic components, with permanent and anti-counterfeiting characteristics.

Laser engraving machine usage precautions

1. Make sure to loosen the screws that fix the crossbeam before turning on the machine!
2. Turn on the machine before water is fully connected to prevent damage to the laser tube.
3. Before turning on the machine, make sure to connect the ground wire (one end to the screw on the lower right corner of the machine, and the other end welded to a large nail, which is driven into the ground or connected to a water pipe), which can protect the machine.
4. The machine should be placed in a well-ventilated area, as the circuit board is most susceptible to moisture.
During thunderstorm season, if you do not use the machine, you should unplug the power cord and data cable to prevent lightning strikes.
6. If the software or computer system fails, causing the machine to walk blocked, quickly turn off the machine power.

Sample Display