Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
Quite special auto supplies 14yr.
Contacts 陈永苗 Chat
Mobile 86-13967427392
E-mail XZHJ008@126.COM
13967427392
【Size】19CM * 3CM (length * diameter)
【Battery】Two AA batteries (must be purchased separately; this product does not include the battery)
Product Introduction:
This product is used for night fault warnings and emergency escape in case of car accidents, and can also be used as a regular lighting device.
1. Life raft hammer/safety hammer: A sharp and sturdy hammer used to break glass for escape in case of an accident.
2. Cutting tool: hook-shaped embedded blade, used to cut off the seat belt for escape in case of an accident.
3. Flashlight: Located at the front of the handle, with a separate switch, providing continuous lighting.
4. Warning light: located on the handle, with an independent switch. A red LED diode flashes, and it can magnetically attach the product head to the roof for alarm purposes.
A must-have for car owners, beautiful and practical. You might never use it once, but in case you need it, it could be your last resort!
Instructions for use:
Insert 2 AA batteries in the specified direction, then close the battery cover.
Press switch 1, and the fluorescent bulb at the top will light up to provide illumination.
Press the switch 2, and the LED will flash.
If you encounter any issues at night, you can use the magnetic attachment at the bottom of this product to stick onto the car roof, which serves as an alarm function.
In case of an accident and unable to release the seatbelt, use the blade to cut the seatbelt and escape.
In case of an accident where the doors and windows cannot be opened, you can use a hammer to break the glass and escape.
Note:
This product is magnetic; do not place it near metal objects or anything that may be affected by magnetism.
This product should be kept in the car or at home for emergency use; do not take it with you.
Please remove the battery when not in use, and insert it back when needed.
Please do not twist the bulb part too much, and the battery is installed by unscrewing from the magnet part.










Update time:
TOP