Yellow and green special phosphor can keep shining in the dark

1. Sharp hammer head, break the glass to escape in case of accident.

2. Cutting knife, cut the safety belt in case of accident.

 

Hammer head: high carbon steel

The PP handle

 

rendering

 

Be exposed to sunlight or light during the day

 

 

 

Orange and fluorescent powder can continue to shine in the dark

 

 

1. Sharp hammer head, break the glass to escape in case of accident.

 

2. Cutting knife, cut the safety belt in case of accident.

 

 

 

Hammer head: high carbon steel

 

The PP handle

 

rendering

 

Be exposed to sunlight or light during the day

 

 

 

If the door cannot be opened or the safety belt cannot be unfastened, use the \"two-in-one safety hammer\" as soon as possible.

 

 

 

 

 

Method of use

Use of safety hammer

Lifesaving hammer is mainly used its the tip of the cone, because of the point contact area is very small, so when use hammer to hit the glass, the contact pressure of glass (not pressure, but pressure per unit area) is quite big, this is a little similar with the principle of the pins, membrane easily stabbed broke, and made the car glass at this point is a lot of outside forces and produce a slight craze, for toughened glass, a little bit of cracking means that the stress distribution within the whole piece of glass was damaged, and in an instant the spider mesh crack and at this time as long as gently with a hammer to hit a few times can rid the shards of glass.

The middle part of the tempered glass is the strongest, the corners and edges are the weakest. The best way to do this is to hit the edges and corners of the glass with a safety hammer, especially the middle part of the top edge of the glass. It is said that about two kilograms of pressure can smash the edges of tempered glass

Without a safety hammer, a woman's high heel is a good thing.

2. Getting on the bus:

If taking a long bus, it is best to sit near the safety door or roof exit. If you wish, you can read the instructions on how to open the safety door carefully, because in case of an accident, you cannot read the instructions calmly and attentively.

Product features 

   When an accident happens to a car (e.g. the car rolls over, falls into a river, etc.) and it is necessary to escape from the car, the safety belt can be cut off with the cutter at the end of the lifesaving hammer, and the window glass can be broken with the pointy lifesaving hammer, and then the car can be jumped out. It is the last protective barrier for passengers!

 

    Product features:   

 

   This product is very excellent in the appearance design, quite commendable: it and the general similar products, more humane, more in line with the actual needs. For example, the end of the hook is an outstretched hook. Unlike some products, this part is not protruding and is as close as the handle, which makes it more difficult to use in an emergency. Just think, in an emergency, how many people will calmly put the safety belt at the knife gap? And our this product, use more convenient, emergency, as long as people put it to the seat belt, it's out of the hook will naturally hook on your seat belt, and make the belt into the gap on the cutter, on the other hand, its base design, make the product with a very solid, let the car turbulence also won't fall down, and if necessary, can be very convenient,