steel wire trailer rope 5 tons 4 meters long trolley cable hand holding rope emergency car pulling rope

Trucking rope/tractor belt/5-ton towing rope 4 meters self-rescue rope
【Product Name】: Steel Wire High-Tensile Trailer Rope
【Product Model]: Diameter 10mm
【Product Color】：Blue
【Product Dimensions】: The total length of the steel cable is 4 meters (including the hook), with a diameter of approximately 8 MM. A 10-MM thick PVC outer layer is attached.
【Product Material】: Steel wire + PVC hose coating
[Product Description]:
When driving out, it’s inevitable that there will be issues with the vehicle—whether on a highway or at night when it suddenly breaks down...
At this point, you will definitely need a trailer rope to pull the vehicle away from the breakdown site. The thickened trailer strap is made with reinforced material capable of withstanding a load of 5 tons, and has undergone special processing to prevent and reduce vibration between the two vehicles during towing. The forged lock-hook is more secure and safe, and can prevent the hook from falling off during towing, adding extra safety for your emergency driving situation.
1. The steel wire material trailer rope is not only of the right length, but also capable of withstanding high tensile forces. It is 4 meters long and can withstand the pulling force of vehicles weighing up to 5 tons. It is suitable for most types of vehicles (not applicable to large trucks or vehicles over 5 tons).
2. The enhanced casting lock hook is more robust and safe, and can prevent the iron hook from falling off/breaking during dragging (within the rated tonnage).
3. To make it easier for you to tow the vehicle away from the breakdown location.
4. Do not use the vessel beyond its approved tonnage.

【Product Features】：
1. The trailer rope has been specially treated to prevent and reduce vibration between two vehicles during towing.
2. The trailer rope is made of steel wire, making it safer for use at night.
3. The forged lockable iron hook is more robust and safe, and can prevent the hook from falling off during dragging.
4. It will make it easier for you to tow the car away from the breakdown location.
5. Do not use the vessel beyond the approved tonnage.
【Precautions】：
1. Do not use the device beyond the specified load capacity;
2. Do not drag on rough surfaces;
3. Not to be used for towing repairs when the structure is damaged;
4. When towing, pull and drag slowly; do not tow rapidly.
5. Regular checks should be conducted to ensure proper operation during towing.
【Truck Trailer Tips】：
No matter the level of the car, problems are inevitable when driving on the road. If the vehicle breaks down and cannot continue, as long as there are no major issues with the steering or braking system, you can find another car to tow it back first, and then have it repaired.
Tie one end of the trailer rope to the front axle plate at the front vehicle, and the other end to the lower front suspension near the center of the vehicle, with a distance of several meters between the two vehicles. It is advisable to attach a handkerchief in the middle of the trailer rope as a identification marker.
When towing, experienced drivers should drive the rear vehicle, as it is difficult to control. Any slight negligence or improper operation could result in hitting the tow rope or failing to turn properly, leading to a collision.
When the trailer starts moving, due to the additional weight of another vehicle, the preceding vehicle must refuel more to increase the engine speed. Then, slowly release the clutch pedal, let the rope tighten, and finally begin movement. During driving, it is essential to control the speed carefully; even on good road conditions, do not drive at high speeds.
When the vehicle shifts gears, the tow rope will loosen slightly. At this time, the towed vehicle must not step on the brakes. Otherwise, when the leading vehicle accelerates, the tow rope will suddenly tighten under the impact. Only at the moment the rope touches the ground can the brake be pressed lightly.
If the slope is long during downhill driving, you can release the rope so both vehicles slide down separately, which is very safe. If the slope is short, keep the rope attached while descending. The vehicle ahead should not step on the brakes easily, while the vehicle behind can lightly press the brakes to keep the rope taut.
When stopping at a intersection, the car ahead should gently press the brakes a few times first to give a signal to the following vehicle, after which the following vehicle presses the brakes, and both vehicles come to a stop. When turning, it is essential to make a large circle and keep the rope taut as much as possible to avoid any danger.