Bonty fast and efficient fuel system cleaner B-1823

Name: Paul Lee fuel system fast and efficient cleaning agent

Brand: Paul Lee

Capacity: 320ML

Shelf life: 3 years

Code: B-1823

[introduction]

The following characteristics this product adopts advanced formula and supermixture, production process and refined: removal of coke engine fuel injector,intake valve and combustion chamber, regain momentum. Remove enginehysteresis, hesitate, unstable idle speed and acceleration problems. Lubricationand improve fuel system function, prevent rust and corrosion.

[use]

Traveling 20000 kilometers per one use, spray cleaning equipment and supporting pressure system cleaning tool by using the intake system of special.According to the operating instructions for use in the work stress state under the appropriate. The product is prohibited directly into the fuel tank.

1, start the engine to normal operating temperature, turn off the ignition device and accessories, open the tank lid release oil, then disconnect the pump, canunplug the pump insurance, after starting the engine, as far as possible toconsume oil in the residual gasoline, while recognizing the oil pump has been disconnected.

2, breaking into the oil pipeline, and the appropriate connector to the inlet pipe.

3, Paul Lee fuel system cleaning agent special for oil filler cover open, and 1 bottles of Paul Lee fuel system cleaning agent into Paul Lee fuel system cleaner special instrument.

4, tighten the lid, Paul Lee fuel system cleaner special instrument hanging in the far away from the car moving parts, battery and high heat engine cover.

5, the rapid joint special cleaning agent for Paul Lee fuel system received jointinlet pipe, and close out of the oil valve switch agent special for cleaning Paul Lee fuel system, then the agent special for cleaning Paul Lee fuel system air inlet is connected to the power supply.

6, slowly adjusting pressure regulating valve, the pressure in the bottlepressure reaches the desired value, and open the special cleaning agent forPaul Lee fuel system oil valve and close, and check whether all the jointsleakage.

7, start the engine to maintain the idle, and adjustable pressure gaugepressure, work to tank empty.

8, cleaned, slowly the pressure regulating valve is closed, and Paul Lee fuel system cleaner special for the ball valve switch pipe closed, switch off the ignition engine will, will receive a car into the quick connector tubing onremoved, remove Paul Lee fuel system cleaner special equipment.

9, according to the assembly sequence reverse operation, remove all the joints,reconnect the auto oil, oil pump cover the fuel tank cap, observe whether there is leakage.

[note]

1, keep away from heat and fire.

2, do not swallow, avoid contact with skin and eyes, if contact with eyes or stickyskin, rinse immediately with plenty of water, serious situation should immediately seek medical treatment.

3, no contact with paint or plastic products.

4, please keep in contact with the local children can not.