本产品不含沥青！

全部为橡胶材质，附着力强

可给爱车提供6-8年的贴身防护！

车底装甲(水性灰/黑)八至十年呵护

【型 号】：B-1731

【产品规格】：1000g×12

【有 效 期】：三年

【执行标准】：Q/ (GZ) BCL 56

【产品介绍】：Q/ (GZ) BCL 56

本产品具有持久的附着力和抗撞击性能，有效防止生锈，具有优良的弹性，帮助降低噪音和防止撞击；固化成份含量高，涂层厚，方便施工；以水为分散介质，绿色环保。广泛用于汽车底盘及工业领域。

[product]

The 1 Mercedes Benz, BMW and other luxury cars, after the factory generally do not need to re do armored chassis antirust processing, of course, after 2-3years of luxury cars, usually to 4S stores to do the chassis maintenance, can bewashed, running 4-5 years later they have to re do the antirust armor.

The 2 most economy cars, all need to be armored chassis, preferably while new car as soon as possible, in order to extend the life of the car. Armored vehicle chassis treatment sooner the better, the new car the best treatment as soon as possible. The new car without any grinding, cleaning can be directly sprayedarmor material, the treatment effect is better than a few years car. Armored vehicle chassis strengthening protection of engine, transmission system, tire system, can extend the service life of 2-3 years vehicle.

[products]

Made of new synthesis technology of water environmental protection of elastic material and a new generation of chassis anti-collision paint, strong adhesion,with corrosion resistance, excellent rust resistance to gasoline, non flammable,effectively prevent the chassis of fire, high elasticity, reduce noise, high solid content, coating thickness, coating 4 tank beyond the ordinary primer the effect of 8 tanks, with water as the dispersion medium, green environmental protection, has excellent construction performance. Can be used for thechassis, engine cover, round arc, tail, trunk and other parts.

Recommendations applicable models: in high-grade car and car.

[step]

1 new vehicles must use high pressure spray gun carriage car chassis orthoroughly cleaned;

2 if the car is to remove rust, oil stain on the surface must be clean, clean afteruse wind blow, later will not spray part paper covering (including the exhaust,engine, water tank, spring and frame number).

3 hands the lid on, insert the special spray this product company and moved to homogenise (body shaking 30 seconds press the nozzle for spraying will useaerosol adhesive for automobile chassis) and distance 25cm evenly spray can.

4 normal injection should be three times of repeated thin spray, to have a certain time interval between each spray, at room temperature for more than 10 minutes (the best interval to dry to the touch), after the first injection is completed, the holes, cracks, connection must use patching glue repair strickleafter injection, more than 2mm thickness sound insulation effect is obvious.(knowledge)